VALANCE PANEL, Rear, improved repro, new tooling with better fit and thicker 1.2 mm steel vs 0.8 mm, GT style with exhaust cut outs and back up light holes, See 40544-1K, 40544-2K, 40544-3K, 40544-1AK, 40544-1BK, 375838-S, 40545-1K, 40545-1BK, 40545-1DK, 40545-1AK for mounting hardware and license plate mouning options,
NPD Part Number : 40544-2D Manufacturer Reference #'s: FDM1016AD,
1965-1966 MUSTANG GT, W/ BACK UP LIGHTS
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The panel is 1/4" shorter in overall length than the original and it measures 1.0mm in thickness as opposed to the 1.2mm listed in the description. Other than that it is a clean stamping but will have to be modified to fit.
Submitted on January 15, 2015 by Brian J.
I Purchased the item for a non-GT Mustang of the same year and it was an inch too long. NPD says that this part does not fit a non GT Mustang. I guess their supplier make these rear valances in different lengths for the same year car.(GT vs Non-GT) The Mustang Shops that I referred to said that they should be the same length and interchangeable.
Submitted on December 16, 2020 by Terry L.
Quality
Value
I Purchased the item for a non-GT Mustang of the same year and it was an inch too long. NPD says that this part does not fit a non GT Mustang. I guess their supplier make these rear valances in different lengths for the same year car.(GT vs Non-GT) The Mustang Shops that I referred to said that they should be the same length and interchangeable. Previous rating was entered in error. Giving only 1 star. Would give no stars but not an option for that.
Submitted on December 16, 2020 by Terry L.
Quality
Value
There is a lot of body work to be done if you want it perfect. The bottom edge was warped and probably not worth the effort to fix it but a solid piece of steel and a good fit
Submitted on May 09, 2021 by James J.
YES I would recommend this product.
Quality
Value
Goid, quality part, well made. Heavier gauge metal. Well worth the few dollars more for the quity.
Submitted on July 20, 2023 by Tom J.
YES I would recommend this product.
Quality
Value
Fitment was fine and quality was good. The typical adjustments need to made where the spring clip attaches to the quarter panel. Mine were off slightly and I needed to bend them inwards to get the gap between the quarter panels and the valance to be acceptable.
Submitted on July 29, 2024 by Andrew M.
YES I would recommend this product.
Quality
Value
In Stock!