Boot style. Economy replacement. Hardware not included. Fits original upper control arms. May not fit different variations of reproduction upper arms.
See 3082-3BK, 3082-3CK, 3082-3DK for hardware kit options.
Ford Mustang and Shelby Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Torino and Ranchero Years:
1968 (68), 1969 (69), 1970 (70), 1971 (71)
Above years shown are used for searches and are not application listings.
NPD Part Number : 3047-2B Manufacturer Reference #'s: 7K8131, C6OZ-3047-A
1967-1973 MUSTANG
1967-1973 COUGAR
1966-1970 FALCON (BEFORE 1/1/70)
1970-1970 FALCON (FROM 1/1/70)
1968-1971 TORINO
1966-1970 FAIRLANE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This is a basic replacement part. Not well finished. Grease boots are thick and hard, could not compress or roll back to install. Had to cut one and RTV it back together after shaft installed in upper arm.
Submitted on March 19, 2020 by Paul M.
YES I would recommend this product.
Quality
Value
This product has all the right contors of the original.
Submitted on May 26, 2020 by Christina S.
YES I would recommend this product.
Quality
Value
The shaft was 3/16 longer than stock and wouldn't fit in my control arms. The bushings were able to be rolled back if heated in hot water. unfortunately one split, decided to go a different way. control arms replaced, may decide to rebuild later.
Submitted on July 02, 2020 by Michael B.
Quality
Value
This shaft kit has internal o-rings to retain the grease so rubber boots are not required. Kit includes bolts but that are shorter than the original and may be an issue if your upper control arms have been shimmed.
Submitted on February 19, 2021 by Bernard S.
YES I would recommend this product.
Quality
Value