Best repro. Complete contact plate assembly with wires and proper terminals. There are now over 5 manufacturers reproducing this switch. This is by far the best of the offerings. See tool 957-2 for special tool used to remove the terminals from the plugs without damage. An NPD exclusive reproduction.
See 14489-3A and 14489-8A for terminal blocks.
An NPD Reproduction part.
Ford Mustang Years:
1965 (65), 1966 (66)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1965 (65)
Above years shown are used for searches and are not application listings.
Ford Truck F1, F2, F3, F100, F150, F250, F350 Years:
1963 (63), 1964 (64), 1969 (69), 1970 (70), 1971 (71), 1972 (72)
Above years shown are used for searches and are not application listings.
Ford Bronco Years:
1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
NPD Part Number : 13341-2A Manufacturer Reference #'s: C5OZ-13341-BR,
Product Instructions and Additional Info:
Turn Signal Junction Block Connection Instruction1965-1966 MUSTANG W/ ALTERNATOR
1965-1965 FALCON
1963-1964 F100-F250 4X2 EXACT MATCH PER CUSTOMER 08/28/07
1969-1972 F100-F350 (FROM 69 SERIAL# G30,001), USABLE AS REPLACEMENT, WIRE COLORS ARE DIFFERENT
1966-1970 BRONCO (BEFORE 70 SERIAL# 50,001)
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Seems to be of good quality. Installed easily, works great.
Submitted on September 17, 2018 by Joseph S.
YES I would recommend this product.
Quality
Value
Other than it being made in Taiwan, I hope it performs as good as an original Ford part .
Submitted on January 06, 2019 by Dick S.
YES I would recommend this product.
Quality
Value
Exactly like original. Easy install if you know how.
Submitted on May 15, 2019 by Jim M.
YES I would recommend this product.
Quality
Value
Submitted on May 19, 2019 by Mark R.
YES I would recommend this product.
Quality
Value
Submitted on June 03, 2019 by Randy O.
YES I would recommend this product.
Quality
Value
Excellent. Tried the "best" switch from another vendor and had problems with both fit and function. Pulled it and installed this one. Much better, problem solved.
Submitted on August 25, 2019 by Terry D.
YES I would recommend this product.
Quality
Value
Good replacement, but the pin connectors needed to be used from my old part. Other than that it worked fine.
Submitted on March 11, 2020 by Ron M.
YES I would recommend this product.
Quality
Value
Submitted on May 05, 2020 by Gary M.
YES I would recommend this product.
Quality
Value
Finally a switch that isn’t way too tight. Kept breaking other brands because the nylon fingers were breaking.
Submitted on June 05, 2020 by Bruce B.
YES I would recommend this product.
Quality
Value
Perfect length for smaller wheel. Nice finish, looks original.
Submitted on June 05, 2020 by Bruce B.
YES I would recommend this product.
Quality
Value
Switch came very quickly fit great had very good instructions color code easy to read
Submitted on November 05, 2020 by Allen B.
YES I would recommend this product.
Quality
Value
worked great if you need to fix turn signals replace wires and all easy to install.
Submitted on February 16, 2021 by Shannon B.
Quality
Value
Form and fit match the original equipment unit. The install went as well as might be expected with the only minor issue being that the wire in the switch harness that's supposed to be green/orange stripe (on the Ford schematic) is actually a solid green wire. This was a little confusing since there are 2 other green wires in the same harness (green/white stripe and green/red stripe). So while working in the confined, poorly lighted area when under the dash plugging the pins into the connector it was somewhat difficult to ensure that the proper wire was plugged into the right hole in the connector body. This is the third switch that I've put in in the last few months, although the first from this manufacturer. I'm hopeful that it will last longer than the previous ones; the last one of which failed after 300 miles. Only time will tell. Rating with 4 stars because of the wire marking and the uncertainty of long-term reliability.
Submitted on August 01, 2021 by john h.
YES I would recommend this product.
Quality
Value
works fine
Submitted on October 07, 2021 by richard p.
Quality
Value
Quality Reproduction
Submitted on November 01, 2021 by Kelly Z.
YES I would recommend this product.
Quality
Value
NICE PRODUCT AT A GOOD PRICE
Submitted on February 16, 2022 by vincent p.
YES I would recommend this product.
Quality
Value
About half of the wiring colors are different from the OEM harness so I had to do a process of elimination to figure out which was which. They are all there but half different colors.
Submitted on March 04, 2022 by Craig C.
YES I would recommend this product.
Quality
Value
Excellent replacement switch. It worked great in my '64 F-100. I did remove the "horn button" portion and used my original. Great price, fast shipping, and a quality part. The wires were easy to pull down the steering shaft if you understand how to do it. Thanks!
Submitted on April 22, 2022 by Steve C.
YES I would recommend this product.
Quality
Value
Easy replacement, good fit. Wiring color codes for a '66 however its fine in a '65... just keep in mind that there is a slight change in the wiring.
Submitted on May 17, 2022 by Matt a.
YES I would recommend this product.
Quality
Value
Excellent customer service. Fast shipping. Perfect fit into truck.
Submitted on February 17, 2023 by Andrew A.
YES I would recommend this product.
Quality
Value
Perfect fit. Easy install
Submitted on June 28, 2023 by Mark K.
Quality
Value
I had an issue with my front driver side blinker working. I was trouble shooting every possible wire the bulb etc. and of course the ground. Cross and jumped the wire and contact. In the end it was the wire harness. All is good now.
Submitted on September 02, 2023 by Michael H.
YES I would recommend this product.
Quality
Value
Switch seems to be okay. The wire ends could stand to be better quality. Prongs easily break and do not snap firmly into place.
Submitted on October 02, 2023 by Ronald W.
YES I would recommend this product.
Quality
Value
It fit perfectly
Submitted on January 02, 2024 by Gary G.
YES I would recommend this product.
Quality
Value
Great Product 10/10 I have installed 3 previous harness and This one has a Great quality from the flexibility of cam plastic to the wires quality. install Hint: Tape the wires ends together about 5 inches with painters tape that way they glide throughout the column wire channel easily. I also liked that if available NPD will tell you what parts are the best compared to the others, it saves you a hustle to be looking for quality parts specially for a daily driver.
Submitted on February 09, 2024 by Arturo G.
YES I would recommend this product.
Quality
Value
Broke after approximately 250 miles. Will order the -2B version this time.
Submitted on February 27, 2024 by Kevin F.
Quality
Value
This is the only turn signal switch to get! All the others out there are poor quality and garbage. This one works!
Submitted on May 06, 2024 by Paul B.
YES I would recommend this product.
Quality
Value
like original, had to move the harness around to make the crappy Chinese deluxe wheel quit making the horn beeping when turning right
Submitted on June 08, 2024 by Steven H.
YES I would recommend this product.
Quality
Value
In Stock!
