Street Bandit. Trans-Am style super heavy duty. Bolts to frame and to lower control arm to make the lower arm mount more rigid and limit camber changes. Designed using the original Trans-Am Boss 302 blueprints to correct dimensions and improved from the original, this bar is far stronger than the original design and provides more clearance for larger oil pans. Main tubes are 1 3/8” x .120” DOM seamless tube with 3/16” mild steel gusset plates. All this in a design that is similar to a roll bar and is far stronger than the original crossmember and will maintain proper dimensions while providing a more rigid mount for the lower control arm to limit flexing and camber changes. No loss of ground clearance over a stock crossmember. 5 1/4” tall. All required hardware to install is included with grade 8 bolts to mount the bar to the frame rails and the long bolts for mounting the control arm. This crossmember is our own special design that has been copied by others.
Note: This crossmember is made to original Ford dimensions for the frame and control arm mounting points. Any differences between this bar mounting to the intended car are issues with the car and like an export brace or Monte Carlo bar, the car will need to be adjusted to fit the bar, thereby correcting any issues the car body may have experienced in it’s lifetime.
Ford Mustang Years:
1965 (65), 1966 (66)
Above years shown are used for searches and are not application listings.
NPD Part Number : 5026-1C Manufacturer Reference #'s: National Parts Depot 5026-1C,
1965-1966 MUSTANG
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
It’s a nice piece for anyone driving a 66 Mustang. If your car is like mine you need some dimensionally correct parts to keep things in place. This part effectively doubles the strength of the lower control arm pivot point, a good thing when there’s only one! I also feel it is a better version than some of the other similar crossmembers available.
Submitted on October 23, 2021 by Patrick M.
YES I would recommend this product.
Quality
Value
In Stock!
