TOOL, Ignition Switch Bezel, Specially designed for the removal and installation of the delicate chrome plated bezel nuts without damaging the chrome or scratching the paint, Also works on many other Ford products, Machined from strong 6061 billet aluminum, Note: This tool fits original bezels perfectly, It struggles with the repro bezels which have soft notches with thick chrome plating,
NPD Part Number : 929-1 Manufacturer Reference #'s: T-100-YL,
1967-1968 MUSTANG
1967-1968 COUGAR
1966-1967 FALCON
1966-1967 FAIRLANE
1967-1979 F100-F350
1978-1979 BRONCO
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Bought this to help me assemble the retaining ring on my '67 ignition switch, and it's pretty much worthless. The three tangs that are supposed to fit in the slots on the ignition switch bezel don't fit, they appear to be too thick to fit into the slots and it won't stay centered on the ignition switch. I have a repo bezel, since new ones aren't available, but the repo I have appears to be an exact copy of the OEM bezel
Submitted on January 02, 2021 by John P.
Quality
Value
I have tried this I'm disappointed the teeth on this tool striped out on first try to tighten my ignition bezel.
Submitted on June 05, 2022 by Loran M.
Quality
Value
Tool worked as designed to tighten the ignition switch bezel on my 1973 F250. Much better than trying to use a punch or chisel. You do need to hold the ignition switch housing behind the dash with one hand while using tool with your other hand so be prepared for that.
Submitted on June 26, 2023 by Paul V.
YES I would recommend this product.
Quality
Value
Tool to big for rhe bezel . Has uses elsewhere
Submitted on July 13, 2023 by Donnell C.
YES I would recommend this product.
This
tool fits the original perfectly and it fits our repro, 11584-2A from
Carpenter, pretty well (but not perfect). It is noted in the description
that it struggles with some repros due to differences in the notch widths and
chrome plating.
Quality
Value
Worked on my '67 Mustang Fastback....... Had to rotate it to line-up......
Submitted on July 28, 2023 by Richard G.
YES I would recommend this product.
Quality
Value
This tool was offered in a lower quality version for a lower price but was not available. The other version had 3 roll pins to make contact with the slots in the ignition bezel this tool has FULL contact and much less likely to damage the bezel!!! Considering a new bezel is almost 3 times the price of this tool, I would consider it to be much more better good than the other version!!!
Submitted on December 23, 2023 by Ron
YES I would recommend this product.
Quality
Value
Worked perfect!!!!
Submitted on January 01, 2024 by Michael D.
YES I would recommend this product.
Quality
Value
In Stock!
