SWITCH ASSY, Horn Blowing, 3 spoke deluxe rim blow steering wheel, best repro, US-made, We have tested all the available repros and this unit is easily the finest and most durable switch currently available, Each unit is pre-tested by the manufacturer, Not liable for damage caused during installation, Switch connections are eyelet for screw mounting,
NPD Part Number : 13A875-1A Manufacturer Reference #'s: C9AZ-13875, C9AZ-13A875-C
1969-1969 MUSTANG W/ 3 SPOKE RIM BLOW WHEEL
1969-1969 COUGAR W/ 3 SPOKE RIM BLOW WHEEL
1969-1969 FALCON W/ 3 SPOKE RIM BLOW WHEEL
1969-1969 FAIRLANE FAIRLANE, TORINO, W/ 3 SPOKE RIM BLOW WHEEL
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The trick to making these work is build a guide out of rod or something you can use to measur the slot the horn goes in. Very important, as the plastic shrinks some with age and you may need to sand with 80 grit the opening up to fit your guide tool before trying to install, You must be so gently pressing it in with the popcycle stick or it will damage it. It takes patience and prep to get these right , but sure is neat when they work.
Submitted on April 02, 2020 by Patrick F.
Quality
Value
Very difficult to install, after installation the switch did not function( all the way around, only certain areas)
Submitted on September 02, 2020 by James R.
Quality
Value
good product as OEM
Submitted on January 29, 2021 by gary B.
YES I would recommend this product.
Quality
Value
Very difficult to install. The rubber is not very pliable and once it is installed the rubber is difficult to compress enough to blow the horn. I recommend buying the new wheel with the switch installed because you will buy 2 or 3 of these before you get one to work.
Submitted on September 12, 2021 by ron g.
Quality
Value
Submitted on August 31, 2022 by JR N.
YES I would recommend this product.
Quality
Value
Perfect fit. A little fiddly to install, but it just takes some patience, persistence, and a gentle approach. If you don't work slowly and gently you could damage it during installation. Works consistently all the way around. Requires a firm press to activate horns (which is better than my old, hardened original switch which was VERY touchy and resulted in lots of accidental honks).
Submitted on April 26, 2023 by Douglas H.
YES I would recommend this product.
Quality
Value
It worked.
Submitted on May 15, 2024 by Tommy P.
YES I would recommend this product.
Quality
Value
In Stock!
