BRACKET AND BUSHING KIT, Sway Bar Mount, universal design, (8) includes a pair of black urethane bushings and brackets to fit 1 1/8 Inch O.D. sway bars, plus four flat washers, Addco
Note:
This is a universal bracket design. Brackets measure 4 25/64 inches over all length, while the openings for the mounting holes are between 2 15/32 inches and 4 9/64 inches. May require modification to work on certain models; please check measurement against your vehicle before ordering.
Chevrolet Camaro Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81)
Chevrolet Chevelle / El Camino / Malibu Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87)
Chevrolet Nova / Chevy II Years:
1962 (62), 1963 (63), 1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79)
Chevrolet C / K 1/2-Ton Pick-Up Truck Years:
1947 (47), 1948 (48), 1949 (49), 1950 (50), 1951 (51), 1952 (52), 1953 (53), 1954 (54), 1955 (55), 1956 (56), 1957 (57), 1958 (58), 1959 (59), 1960 (60), 1961 (61), 1962 (62), 1963 (63), 1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93), 1994 (94), 1995 (95), 1996 (96), 1997 (97), 1998 (98)
Pontiac Firebird / Trans Am Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81)
Pontiac GTO / Lemans / Tempest Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72)
Oldsmobile Cutlass Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88)
Buick Skylark Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72)
Chevrolet Monte Carlo Years:
1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88)
NPD Part Number : C-7243-103A Manufacturer Reference #'s: 64-614-0W
1967-1981 CAMARO
1964-1987 CHEVELLE CHEVELLE, EL CAMINO AND MALIBU
1967-1981 FIREBIRD
1962-1979 NOVA
1964-1973 TEMPEST GTO, LEMANS AND TEMPEST
1974-1981 TEMPEST LEMANS
1947-1998 CHEVY TRUCK
1964-1988 CUTLASS
1964-1972 SKYLARK
1970-1988 MONTE CARLO
1964-1970 FALCON (BEFORE 1/1/70)
1966-1971 FAIRLANE FAIRLANE, TORINO, 70 1/2 FALCON
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This doesn't fit a 1970 GTO. The mounting holes do not line up. Otherwise it looks like a nice part.
Submitted on August 22, 2020 by Erik B.
Quality
Value
I had to do a little bit of grinding to make them work but I got them
Submitted on June 03, 2021 by mario c.
Quality
Value
FIT- holes in bracket did not align with holes on vehicle, bracket holes about 1/4" too narrow, required to drill out bracket hole to install, brack not same footprint as oem bracket being replaced.
Submitted on September 21, 2022 by Christopher b.
YES I would recommend this product.
Quality
Value
The bushings are exactly what I expected and fit the original brackets perfectly, nice tight perfect fit around sway bar. The brackets provided however were just steel stamped cutouts with cutouts for bolts not aligned at all with bolt spacing on frame.
Submitted on February 08, 2024 by john t.
YES I would recommend this product.
Quality
Value