SWAY BAR KIT, Rear, by Addco, 3/4 inch diameter, heavy duty custom bent black powdercoated bar, black polyurethane bushings with end links and frame brackets, mounting hardware and instructions are included, ADDCO anti-sway bars will cut body roll and increase cornering ability, Match a 1 front bar with a 3/4 rear bar and a 1 1/8 front bar with a rear 7/8 bar for the best match for neutral handling using stock springs, High carbon steel bars with forged rod ends ensure against deformation
NPD Part Number : 5A772-6A Manufacturer Reference #'s: Addco K1-995-0U (K),
1967-1970 MUSTANG
1967-1970 COUGAR
1963-1965 FALCON
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
I wanted a larger, 3/4" anti-sway bar which would fit just like the factory rear sway bar on my 1970 Mach 1. The NPD rep led me to believe this was what I wanted, but that was not the case. It appears to clamp to the differential and leaf springs and it is much shorter than the factory anti-sway bar. It appears to be a good quality anti-sway bar. Just be aware it does not install or fit like a factory, rear anti-sway bar.
Submitted on August 06, 2018 by Patrick G.
YES I would recommend this product.
Quality
Value
The swaybar did not fit my car 68 mustang because the exhaust was in the way. The bushings did not ship with the part
Submitted on December 27, 2020 by Norman c.
YES I would recommend this product.
Quality
Value
In Stock!
