Cross Sill, Rear, Steel, includes rear welded in bracket, Bolts holes punched for bed strips and stake pockets, US-made reproduction
The rear cross sill is located below the tailgate. It ties the back of the bed together by being bolted crosswise from one bed side to the other. This rear sill has "brackets" welded in place. The bed-to-frame bolts passes through these brackets as it bolts from the wood to the frame. The strips and wood sit on the ledge that has predrilled holes for mounting. The rear cross sill protects the edges of the wood boards. Rear cross sill includes attachment holes for wiring clamps and all bolt holes. Made in USA
Installation Note:
It is recommend that you bolt the rear sill to the stake pockets. first. Make sure everything is square and level before tightening the bolts, then weld the rear cross sill to the stale pockets if desired, The bed strips and wood are bolted down to the rear cross sill after the rear cross sill is in place.
Chevrolet C / K 1/2-Ton Pick-Up Truck Years:
1955 (55), 1956 (56), 1957 (57), 1958 (58), 1959 (59)
GMC C / K 1/2-Ton Pick-Up Truck Years:
1955 (55), 1956 (56), 1957 (57), 1958 (58), 1959 (59)
NPD Part Number : K-17405-56RU Manufacturer Reference #'s: 100715
1955-1955 CHEVY TRUCK 2ND SERIES, 1/2 TON, STEP SIDE, SHORT BED, W/ WOOD FLOOR
1956-1959 CHEVY TRUCK 1/2 TON, STEP SIDE SHORT BED, W/ WOOD FLOOR
1955-1955 CHEVY TRUCK 2ND SERIES, 1/2 TON, STEP SIDE, LONG BED, W/ WOOD FLOOR
1956-1959 CHEVY TRUCK 1/2 TON, STEP SIDE LONG BED, W/ WOOD FLOOR
1955-1955 GMC TRUCK 2ND SERIES, 1/2 TON, STEP SIDE, SHORT BED, W/ WOOD FLOOR
1956-1959 GMC TRUCK 1/2 TON, STEP SIDE SHORT BED, W/ WOOD FLOOR
1955-1955 GMC TRUCK 2ND SERIES, 1/2 TON, STEP SIDE, LONG BED, W/ WOOD FLOOR
1956-1959 GMC TRUCK 1/2 TON, STEP SIDE LONG BED, W/ WOOD FLOOR
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In Stock!
