Steeda Rear Sway Bar for 79-04 w/ factory Style Mounting

SWAY BAR, REAR, STEEDA, 1 INCH SOLID STEEL BAR, DESIGNED TO BE UP TO 45 PERCENT STIFFER THEN STOCK, DESIGNED TO WORK I. FACTORY SWAY BAR LOCATION

Have you broken your factory rear sway bar? Have you broken a competitors replacement rear sway bar? Maybe you have even broken one of Steedas older sway bars from 8 to 10 years ago? As strong as they made their rear sway bar in the past, once in a while someone would find a way to break even their upgraded bar. Well, not anymore! After over a decade of refinement, this is now the strongest, most bullet proof rear sway bar in the market. This sway bar is a full steel solid 1" bar! They believe it is the last rear sway bar you will ever have to buy! The stock sway bar's ends and many aftermarket replacements as well are smashed flat from the same piece of round tubing that makes up the rest of the bar. This process significantly reduces the structural integrity of the material, hence why the factory sway bar breaks in this area and most aftermarket sway bars as well.

Knowing this, Steeda has put massive, thick billet steel ends welded onto the ends of the bar. No smashing of the ends. Billet steel ends are far stronger than the resulting smashed ends and welding them to the bar makes for a far stronger point of connection. This eliminates the inherent weakness of the factory and many aftermarket designs. They are so confident in this current design that they put a lifetime warranty behind it. If you find a way to break this current bar design, we will give you another one!

Steeda's rear sway bar is 5 to 45% stiffer than your factory rear sway bar depending on your O.E. sway bar diameter. This sway bar kit includes the sway bar and new grade 10.9 mounting hardware.

Their sway bars have machined steel billet sway bar ends, whereas others on the market have coined ends. What does this mean? Our sway bar ends are machined out of billet steel round stock, in-house, on their multi-axis CNC lathes and go through hundreds of computer simulations to ensure the ultimate in strength and performance - this provides greater resistance to bending stresses, and has three major advantages:

These parts are less prone to cracking/fatigue failure on the ends themselves.

It also reduces unwanted deflection in the sway bar end. Excess deflection creates unwanted geometry changes, which physically changes your sway bar stiffness to a non-ideal rate.

With less unwanted deflection, their bars will 'wear out' slower - any spring will eventually become softer over time as it is cycled through its life, Steeds bars will maintain their designed rate for longer with less unwanted deflection.

Their bar rates are developed and optimized through advanced vehicle dynamic simulation and through extensive real-world testing. They engineered these bars to control the vehicles' roll stiffness properly while still allowing you to run softer springs. This optimizes your overall grip and balance of the vehicle while still allowing you to maintain exceptional ride quality.

Note:

Replacement warranty applies only to this current bar design. Does not fit 99-04 IRS Cobra

Ford Mustang Years:

1979, (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93), 1994 (94), 1995 (95), 1996 (96), 1997 (97), 1998 (98), 1999 (99), 2000 (00), 2001 (01), 2002 (02), 2003 (03), 2004 (04)

NPD Part Number : M-5A772-2FA
Manufacturer Reference #'s: 555-1085