STARTER, Super Torque, all new, chrome case, 2 bolt, 3/4 inch offset, Offset is the distance from the starter mounting surface to the engine side of the ring gear, Fits 4.084 inch diameter block plate, The applications listed are original listings, We have found some mixing has occurred over the years, Check your measurement before ordering, 1.9 horsepower, 1.4 Kw, See 11002-4AK, 11002-5AK for mounting hardware options, Typically the 3/4 inch offset Ford starter is used on M/T with 157 or 160 tooth flywheels and all A/T (157, 160 or 164 tooth flexplates),
NPD Part Number : 11002-4D Manufacturer Reference #'s: Tuff-Stuff 3124A, C2OZ-11002-A, C2OZ-11002-B, SA-660, D4OZ-11002-A, D7OZ-11002-A
1965-1965 MUSTANG 260, 289, W/ 3/4 INCH OFFSET
1966-1973 MUSTANG 289, 302, 351C, 351W, A/T, W/ 3/4 INCH OFFSET
1969-1973 MUSTANG 250, W/ 3/4 INCH OFFSET
1979-1995 MUSTANG 5.0L
1967-1973 COUGAR 289, 302, 351C, 351W, A/T, W/ 3/4 INCH OFFSET
1963-1964 FALCON 260, 289, W/ 3/4 INCH OFFSET
1964-1964 FAIRLANE 260, 289, W/ 3/4 INCH OFFSET
1965-1974 F100-F350 240, A/T, W/ 3/4 INCH OFFSET
1965-1977 F100-F350 (BEFORE 2/1/77), 300, A/T, W/ 3/4 INCH OFFSET
1969-1977 F100-F350 (BEFORE 2/1/77), 302, A/T, W/ 3/4 INCH OFFSET
1977-1981 F100-F350 (FROM 2/1/77 TO 1/15/81), 302 A/T, REPLACEMENT, W/ 3/4 INCH OFFSET
1966-1968 BRONCO 289, A/T, W/ 3/4 INCH OFFSET
1969-1977 BRONCO (BEFORE 2/1/77), 302, A/T, W/ 3/4 INCH OFFSET
1977-1981 BRONCO (FROM 2/1/77 TO 1/15/81), 302 A/T, REPLACEMENT, W/ 3/4 INCH OFFSET
1980-1980 BRONCO 351W, A/T, REPLACEMENT, W/ 3/4 INCH OFFSET
1980-1981 BRONCO (BEFORE 1/15/81), 300, A/T, W/ 3/4 INCH OFFSET
1981-1981 BRONCO 351M, W/ 3/4 INCH OFFSET
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In Stock!
