3/4” offset. Offset is the distance from the starter mounting surface to the engine side of the ring gear. Fits 4.084” diameter block plate. The applications listed are original listings. We have found some mixing has occurred over the years. Check your measurement before ordering. Typically the 3/4” offset Ford starter is used on M/T with 157 or 160 tooth flywheels and all A/T (157, 160 or 164 tooth flexplates).
See 11002-4AK, 11002-5AK for mounting hardware options.
As a sustainable manufacturer, BBB Industries’ remanufactured starters and alternators meet or exceed OE standards because they’re built using processes similar to the way new units are made. Components are gauged, sorted, tested, and renewed to OE-quality specifications, and vital parts are replaced with new ones where needed. Because of this strict adherence to OE-quality, BBB Industries’ remanufactured starters and alternators install quickly and easily and provide cranking performance you can count on. BBB Industries is the old Remy brand of alternators and starters.
Core charges apply.
General policy on core returns:
*Returned core must be rebuild-able.
*No broken or missing parts, cracked cases, deeply grooved surfaces etc.
*Moveable items must not be frozen, locked or rusted solid.
*No cases with torch cuts.
*No welded or bent shafts, ears etc.
*Shafts, splines, keyways & threads must be good.
*No disassembled cores credited.
*Returned core must be same part as rebuilt unit purchased.
*Returned core must be returned in same box as rebuilt unit purchased.
*Drain all fluids prior to return and wrap in plastic to prevent leakage.
*Other requirements may apply.
Core returnability will be determined by the remanufacturer and/or NPD®.
Core charges do not reflect the value of the part, they are an incentive to return the part.
Junk parts sent as cores cannot be returned and will not receive core credit.
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1963 (63), 1964 (64)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1964 (64)
Above years shown are used for searches and are not application listings.
Ford Thunderbird Years:
1955 (55), 1956 (56), 1957 (57)
Above years shown are used for searches and are not application listings.
Ford Truck F1, F2, F3, F100, F150, F250, F350, Expedition, Excursion, Lincoln Navigator and Blackwood Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81)
Above years shown are used for searches and are not application listings.
Ford Bronco Years:
1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81)
Above years shown are used for searches and are not application listings.
NPD Part Number : 11002-4A Manufacturer Reference #'s: 25216, C2OZ-11002-A, C2OZ-11002-B, SA-660, D4OZ-11002-A, D7OZ-11002-A
1965-1965 MUSTANG 260, 289, W/ 3/4 INCH OFFSET
1966-1973 MUSTANG 289, 302, 351C, 351W, A/T, W/ 3/4 INCH OFFSET
1969-1973 MUSTANG 250, W/ 3/4 INCH OFFSET
1979-1995 MUSTANG 5.0L
1967-1973 COUGAR 289, 302, 351C, 351W, A/T, W/ 3/4 INCH OFFSET
1963-1964 FALCON 260, 289, W/ 3/4 INCH OFFSET
1964-1964 FAIRLANE 260, 289, W/ 3/4 INCH OFFSET
1965-1974 F100-F350 240, A/T, W/ 3/4 INCH OFFSET
1965-1977 F100-F350 (BEFORE 2/1/77), 300, A/T, W/ 3/4 INCH OFFSET
1969-1977 F100-F350 (BEFORE 2/1/77), 302, A/T, W/ 3/4 INCH OFFSET
1977-1981 F100-F350 (FROM 2/1/77 TO 1/15/81), 302 A/T, REPLACEMENT, W/ 3/4 INCH OFFSET
1966-1968 BRONCO 289, A/T, W/ 3/4 INCH OFFSET
1969-1977 BRONCO (BEFORE 2/1/77), 302, A/T, W/ 3/4 INCH OFFSET
1977-1981 BRONCO (FROM 2/1/77 TO 1/15/81), 302 A/T, REPLACEMENT, W/ 3/4 INCH OFFSET
1980-1980 BRONCO 351W, A/T, REPLACEMENT, W/ 3/4 INCH OFFSET
1980-1981 BRONCO (BEFORE 1/15/81), 300, A/T, W/ 3/4 INCH OFFSET
1981-1981 BRONCO 351M, W/ 3/4 INCH OFFSET
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Submitted on July 06, 2023 by Thomas L.
YES I would recommend this product.
Quality
Value
In Stock!
