STARTER, Mini-High torque, PMGR style. weight 5.5 pounds, 1.9 horsepower, 1.4 Kw power, Mini sized for extra clearance, Includes necessary wire lead and illustrations, 3/4 inch offset, Offset is the distance from the starter mounting surface to the engine side of the ring gear, Fits 4.084 inch diameter block plate, The applications listed are original listings, We have found some mixing has occurred over the years, Check your measurement before ordering, See 11002-4AK, 11002-5AK for mounting hardware options, ** Note the manufacturers installation instructions may suggest a bolt torque of 38 ft/lbs, Unless you have non-original grade 8 bolts limit this to 10-20 ft/lb using factory bolts **, Typically the 3/4 inch offset Ford starter is used on M/T with 157 or 160 tooth flywheels and all A/T (157, 160 or 164 tooth flexplates),
Note use of a PMGR style starter with a computer controlled engine requires the addition of a diode suppressed starter solenoid relay switch (11450), See F-11450-5 (Motorcraft) or M-11450-4B (replacement), for a proper solenoid.
NPD Part Number : 11002-4HT Manufacturer Reference #'s: Tuff-Stuff 6124B, C2OZ-11002-A, C2OZ-11002-B, SA-660, D4OZ-11002-A, D7OZ-11002-A
Product Instructions and Additional Info:
Mini High Torque Starter Instruction 11002-4HT Detail A 11002-4HT Techdata1965-1965 MUSTANG 260, 289, W/ 3/4 INCH OFFSET
1966-1973 MUSTANG 289, 302, 351C, 351W, A/T, W/ 3/4 INCH OFFSET
1969-1973 MUSTANG 250, W/ 3/4 INCH OFFSET
1979-1995 MUSTANG 5.0L
1967-1973 COUGAR 289, 302, 351C, 351W, A/T, W/ 3/4 INCH OFFSET
1963-1964 FALCON 260, 289, W/ 3/4 INCH OFFSET
1964-1964 FAIRLANE 260, 289, W/ 3/4 INCH OFFSET
1965-1974 F100-F350 240, A/T, W/ 3/4 INCH OFFSET
1965-1977 F100-F350 (BEFORE 2/1/77), 300, A/T, W/ 3/4 INCH OFFSET
1969-1977 F100-F350 (BEFORE 2/1/77), 302, A/T, W/ 3/4 INCH OFFSET
1977-1981 F100-F350 (FROM 2/1/77 TO 1/15/81), 302 A/T, REPLACEMENT, W/ 3/4 INCH OFFSET
1966-1968 BRONCO 289, A/T, W/ 3/4 INCH OFFSET
1969-1977 BRONCO (BEFORE 2/1/77), 302, A/T, W/ 3/4 INCH OFFSET
1977-1981 BRONCO (FROM 2/1/77 TO 1/15/81), 302 A/T, REPLACEMENT, W/ 3/4 INCH OFFSET
1980-1980 BRONCO 351W, A/T, REPLACEMENT, W/ 3/4 INCH OFFSET
1980-1981 BRONCO (BEFORE 1/15/81), 300, A/T, W/ 3/4 INCH OFFSET
1981-1981 BRONCO 351M, W/ 3/4 INCH OFFSET
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Very happy with the starter and the wiring instructions.
Submitted on April 15, 2021 by Gerald K.
YES I would recommend this product.
Quality
Value
Nice alternative to the standard OEM starter, works as advertised. Uses GM type solenoid activation, which is ok, but literature and solenoid lead did not match, required adding crimp lead for solenoid end of lead, starter terminal cover missing also. Being a former automotive engineer for electrical systems figured out on my own. Attempted to contact manufacturer, no response.
Submitted on September 21, 2021 by Gary H.
YES I would recommend this product.
Quality
Value
Easy to install and works great
Submitted on August 02, 2022 by Harry P.
YES I would recommend this product.
Quality
Value
No issue with this starter except that it was shipped without the heat shield it was supposed to be provided with.
Submitted on July 17, 2024 by Andrae B.
YES I would recommend this product.
Quality
Value
In Stock!
