SPOT WELD CUTTER, Hardened, by Blair, The fast, easy way to remove spot welds in car restoration or auto body repair work, Blair spot weld Cutters are the Professional's choice for removing spot welds, With two types of spot weld cutters available, removing spot welds is easier than ever, The solid spot weld cutter removes spot welds in Boron and other UHSS. Other Blair spot weld cutters remove spot welds by cutting around the spot weld and leaving the underlying panel undamaged, the damaged panel can quickly be taken off, The panel can be repaired and welded back on or a new panel be put back on using the spot weld cutters to make plug holes for welding, So, whether you work in a high-end collision shop or in your garage restoring your dream machine, Blair Spot Weld Cutters will make life easier,Cuts spot welds out fast, Double-end cutter for more holes, Use in hand-held drills, 1/4" or larger drill chucks, Depth of cut control, Cutter size: 3/8", Made in USA, Cutter RPM should not exceed 500 RPM,
NPD Part Number : 911-2 Manufacturer Reference #'s: 13224,
1965-1973 MUSTANG
1979-2004 MUSTANG
1967-1973 COUGAR
1960-1970 FALCON (BEFORE 1/1/70)
1964-1971 FAIRLANE FAIRLANE, TORINO, 70 1/2 FALCON
1955-1957 TBIRD
1948-1979 F1-F350
1980-1996 F100-F350
1997-2004 F150-F350
1966-1996 BRONCO
1967-1981 CAMARO
1964-1987 CHEVELLE
1967-1981 FIREBIRD
1962-1979 NOVA
1964-1972 TEMPEST GTO, TEMPEST, LEMANS
1947-1998 CHEVY TRUCK
1964-1988 CUTLASS
1964-1972 SKYLARK
1960-1976 MOPAR
1983-2004 R/B/E/M
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Would recommend to anyone that is restoring a automobile
Submitted on February 08, 2019 by Rick B.
YES I would recommend this product.
Quality
Value
Made separation of panels much easier. Main thing is don’t force it let bit do the work with some coolant added . Will break if forced because they are hard tempered. Which makes them stay sharp longer.
Submitted on May 06, 2020 by Tim B.
YES I would recommend this product.
Quality
Value
Great little item works well
Submitted on January 10, 2021 by vincent p.
Quality
Value
Worked great. The center guide pin will control the depth of your cut so don't drill pilot holes all the way through the piece you are trying to drill out. Just use a center punch and start off going slow until the whole is established enough to keep the tool from walking out of the hole.
Submitted on November 30, 2021 by Gregory T.
YES I would recommend this product.
Quality
Value
Submitted on March 05, 2023 by Carl N.
YES I would recommend this product.
Quality
Value
Great product. Works well. Recommend drilling small pilot hole to keep it from walking.
Submitted on April 21, 2023 by Jeff f.
YES I would recommend this product.
Quality
Value