Pair. Fits inside the tower above the frame rail. Pair. Not original but a worthwhile addition to cars driven on rough roads. Reinforces the shock tower to the front frame extension, reducing the flex of the tower. 16 gauge steel.
Ford Mustang Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
NPD Part Number : 3439-1R Manufacturer Reference #'s: 12-3008 (13142),
1967-1970 MUSTANG
1967-1970 COUGAR
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Nice product, cheapest price I could find and lets be honest they are just cut sheet steel. Fit was nice and good finish with no surface rust. Most others were double the price , buy these.
Submitted on July 18, 2018 by john r.
YES I would recommend this product.
Quality
Value
Fit was good right out of the box, a couple trips to the bench grinder and they fit perfect, nice thick steel, no doubt that area is now much stronger
Submitted on May 08, 2020 by Scott p.
YES I would recommend this product.
Quality
Value
Submitted on May 25, 2020 by dominick l.
YES I would recommend this product.
Quality
Value
Submitted on May 26, 2020 by dominick l.
YES I would recommend this product.
Quality
Value
Good fit need a little work but seems to strengthen the area good
Submitted on May 27, 2020 by Charles l.
YES I would recommend this product.
Quality
Value
Great for stiffening the shock towers.
Submitted on August 08, 2020 by James S.
YES I would recommend this product.
Quality
Value
Nice fit and a great addition to make shock towers stronger
Submitted on October 18, 2020 by Tomos R.
Quality
Value
Simple and sweet. Adds much needed reinforcement to the towers.
Submitted on December 31, 2021 by Mike n.
YES I would recommend this product.
Quality
Value
Good product. Just FYI to anyone interested, it doesn't sit flat in the space. It's supposed to be installed in an angle to add strength.
Submitted on August 30, 2022 by Juan B.
Quality
Value
Great product. Fit is almost perfect. It will save you time and money. If you had to source steel then cut them, it would properly cost more money and time they are worth it. The steel is the right thickness. And they will stiffer the shock tower. .
Submitted on March 15, 2023 by Edgardo T.
YES I would recommend this product.
Quality
Value
These show listed for 65/66 mustang, though are significantly oversized, and required a template to be made. Then grinding down to fit.... Satisfied
Submitted on August 11, 2023 by Joseph L.
YES I would recommend this product.
Quality
Value
fit both my original Ford and a replacement Dynacorn shock tower with minimal grinding to fit tight all around. These are about 1/8" thick, very stiff. They sit at an angle and rest against the frame rail lip on the outside. I'm very satisfied with them. It would have been a pain for me to fabricate them myself.
Submitted on November 27, 2023 by William J.
YES I would recommend this product.
Quality
Value
Very heavy gauge. Great for various patches.
Submitted on September 29, 2024 by Timothy W.
YES I would recommend this product.
Quality
Value
very glad to get these parts to help reinforce my suspension..
Submitted on October 29, 2024 by Ernest S.
YES I would recommend this product.
Quality
Value
In Stock!