SEAL, Rear Window Louver, repro, each, correct rubber extrusion that slips into the channel of the louver to seal against the glass to prevent rattles
NPD Part Number : 44284-1A Manufacturer Reference #'s: National Parts Depot FDM1099KF,
1969-1970 MUSTANG FASTBACK
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Item does not slide into the crevice even using 3in one oil and Vaseline. The rubber seems to be too thick for the track.
Submitted on June 16, 2019 by Ronnie J.
Quality
Value
Submitted on April 15, 2020 by Jerry T.
YES I would recommend this product.
Quality
Value
Too thick, won’t slide into Chanel. Tried every lube I could find . No luck
Submitted on July 15, 2020 by Ronnie J.
I've done this install many times, and I've never used a lube. It is indeed a difficult install, but it does go on (and then stays in-place, which is a good thing) with technique and persistence. You've just got to get it started in the channel, get it as far as it will go, then work downstream to pull the tension up out of the rubber, and repeat. And repeat. And repeat. It's easily a 20-minute job.
Quality
Value
It worked great. Hard to put in. Husband measured to the middle and used a full screwdriver to put it in the track
Submitted on October 27, 2020 by Darrell B.
YES I would recommend this product.
Quality
Value
Excellent
Submitted on April 06, 2021 by khalil b.
Quality
Value
The seal seems like a quality product but it’s very difficult to work it around the Louver. Tried many lubricants but nothing has worked yet. To be continued.
Submitted on November 18, 2022 by Marty R.
YES I would recommend this product.
Quality
Value
In Stock!
