SEAL, Automatic Transmission Shift Bezel, best repro, to shift lever, Does not include retainers - see 7D351-2AK, You will need to cut the shifter slit in the rubber, Despite this the molding is much smoother than the 7D351-1
NPD Part Number : 7D351-1A Manufacturer Reference #'s: C5ZZ-7351, C5ZZ-7D351-A
1965-1968 MUSTANG W/O CONSOLE
1968-1968 COUGAR XR-7, A/T, W/O CONSOLE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Simple and straightforward to install. All I needed was a utility knife to split the center of the rubber membrane to give it a little more room for the shifter. Fits and looks great.
Submitted on October 01, 2021 by Todd P.
YES I would recommend this product.
Quality
Value
Worked great-- when move the shifter it doesnt bind up on the rubber like the old one did. The old one one I replaced didnt last long because it was to stiff...
Submitted on October 30, 2021 by Samuel F.
YES I would recommend this product.
Quality
Value
Fits properly but you have to cut the thin center strip of rubber in order to install. While it’s not hard to cut, you end up with jagged rubber after doing so which make the part look bad. The seal needs to be precision cut when manufactured and not left up to the customer!
Submitted on April 05, 2023 by Justin H.
Quality
Value
A good quality part but not the size I need for a bezel seal.
Submitted on July 04, 2023 by Simon M.
YES I would recommend this product.
Quality
Value
Don’t like the fact you have to cut out the slot, hard to do and have a clean cut. After installing and moving the shifter twice, it folded in ward and ripped on the left side. Way to tight on that side. Not installed wrong, line up the holes and attach with clips. Will look for another brand and see if that fits better.
Submitted on October 09, 2023 by Richard P.
Quality
Value
In Stock!
