Textured fiberboard ( aka Masonite or eucalyptus board), paint to match. This material is porous and should be primed before top coating.
An NPD Reproduction part.
See 46656-1AK, 46656-1BK for mounting hardware options and 46698-1A for retainers.
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68)
Above years shown are used for searches and are not application listings.
NPD Part Number : 46656-1A Manufacturer Reference #'s: National Parts Depot M117,
1965-1968 MUSTANG COUPE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Submitted on July 26, 2019 by Fred f.
YES I would recommend this product.
Quality
Value
Used on a '68. The pattern (grain) appears to be a perfect match to the original package tray. You will need to spray paint it with flat black paint but that's not difficult. The only issue is it's about 1/4" too wide and 1/4" too deep. You'll need to trim it with some industrial strength scissors. Otherwise, it just won't fit. Put the original on top of this one and trace around the edges to give you the lines to cut. Then it will fit perfectly.
Submitted on December 14, 2019 by Michael L.
YES I would recommend this product.
Quality
Value
Perfect fit in my 68 Mustang and looks great.
Submitted on March 26, 2020 by angela r.
YES I would recommend this product.
Quality
Value
simple and basic by itself but its workable. My upholstery guy padded and covered mine to match the rest of my interior. Sweetness
Submitted on September 14, 2020 by Donavon P.
YES I would recommend this product.
Quality
Value
Pretty much exactly like my original. Same thickness and texture. It went right into my 67 Mustang coupe. No cutting or trimming required. You will need to paint it to match your interior. The material sucks up a lot of paint. Went through an entire can of exterior black spray paint. Looks great in my car. I would recommend it for anyone looking for an original look and feel.
Submitted on November 01, 2020 by Charles C.
YES I would recommend this product.
Quality
Value
Very good reproduction of stock package tray
Submitted on January 18, 2021 by Steven H.
YES I would recommend this product.
Quality
Value
Perfect fit
Submitted on May 19, 2021 by James J.
YES I would recommend this product.
Quality
Value
Put this panel in my 68 coupe, fit good do not believe it needs any trimming, used it along with the insulation they sell. To install this I had to take out the two quarter window covers, the rear seats and then- unbend the clips they hold in with. I belive from factory they bend These to squeeze the tray. The tray fit quite tight so it was bending up where it was not pushed down so I used to sound dedning to help hold it down. The Material is quite a heavy and durable feeling material. Have not actually cut the holes out for speakers so far.
Submitted on December 25, 2021 by zander B.
YES I would recommend this product.
Quality
Value
Perfect OEM fit.
Submitted on July 03, 2022 by David N.
YES I would recommend this product.
Quality
Value
Trim Panel was identical to the original that came with my '66 coupe, which made for a perfect fit; no trimming required. I used a jig saw to cut the openings for the speakers, painted the panel a flat black, then covered with black vinyl. With the newly upholstered seats and trim panel, the interior looks really sharp.
Submitted on February 13, 2023 by Blaine W.
YES I would recommend this product.
Quality
Value
The board was a little wide and had to be trimmed to fit. Was easy to do.
Submitted on May 23, 2024 by James C.
YES I would recommend this product.
Quality
Value
Good fit.
Submitted on July 29, 2024 by Henry F.
YES I would recommend this product.
Quality
Value
In Stock!
