Custom 21 gauge steel for racing and to increase safety between the trunk and passenger compartment. Screws to the divider between the rear seat and trunk. Sheet metal screws included. Some installers use a sealer on the ribs as well. See also 46656-1S for steel package tray to complete the isolation of the trunk to the passenger compartment.
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68)
Above years shown are used for searches and are not application listings.
NPD Part Number : 45728-1S Manufacturer Reference #'s: C5Q195,
1965-1968 MUSTANG COUPE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Its a piece of sheet metal that fits the opening and I didn't have to cut it. It does the job. I only added more screws though.
Submitted on August 03, 2018 by Aaron M.
YES I would recommend this product.
Quality
Value
Fits good in my 67 coupe.
Submitted on April 06, 2019 by Brad A.
YES I would recommend this product.
Quality
Value
Even though product was damaged on delivery, replacement was promptly delivered and fit was excellent. Excellent customer service!
Submitted on April 13, 2019 by Scott C.
YES I would recommend this product.
Quality
Value
Great product for the price. Fit my 1965 Mustang perfectly. Everyone should install this product for safely to keep gas out in the event of a rupture. FYI - rear seat removes easily and this is simple to install even for a novice. Only hint, don't expect sheet metal screws to penetrate. I need a metal penetrating drill bit and then it was easy as pie. Highly recommended.
Submitted on May 28, 2019 by Richard P.
YES I would recommend this product.
Quality
Value
I painted it black and it looks great from the trunk side. And since the kids ride in back, I feel better about having some metal between them and the gas tank. I did have to drill some holes and screw it in to keep it in position and that why only four stars. But that only took a few extra minutes.
Submitted on June 10, 2019 by Jesse N.
YES I would recommend this product.
Quality
Value
Does the job, but the fit seems like an afterthought. Looks like someone bought a piece of sheet metal and clipped it with metal snips. I’ll have to do a fair amount of adjustments to get it to cover the rear panel
Submitted on September 13, 2019 by Paul S.
Quality
Value
It's a nice piece of sheet steel cut to shape of the divider board. I didn't use the screws, but cut it to hang like the original cardboard. Having those cuts pre-made would have been nice. I painted it as it comes bare (but oiled) and was afraid it would rust.
Submitted on December 05, 2019 by Bryan E.
YES I would recommend this product.
Quality
Value
Part fit as expected. Came without advertised attaching sheet metal screws so I d coded to weld and seam seal it in. NPD was fine to work with.
Submitted on December 26, 2019 by Donald W.
Quality
Value
fits good, only minor trim needed,
Submitted on January 17, 2020 by Philip K.
YES I would recommend this product.
Quality
Value
fits good, every mustang needs this for fire safety!
Submitted on January 17, 2020 by Philip K.
YES I would recommend this product.
Quality
Value
Very nice piece of steel, will be a good safe barrier. I primed and painted it ; I'm going to use pop rivets instead of the screws.
Submitted on January 29, 2020 by JONATHAN S.
YES I would recommend this product.
Quality
Value
Steel die-cut panel fits great and includes the self-tapping sheet metal screws.
Submitted on March 03, 2020 by David n.
YES I would recommend this product.
Quality
Value
Fit pretty good. Shipping was just a couple days. I had to shape it into some bends and ended up bolting it and welding it in. I undercoated one side and sprayed bedliner on the trunk side. I can no longer hear my electric fuel pump and it quieted down the cabin a bit. Its a good addition for the money.
Submitted on June 02, 2020 by Eric J.
YES I would recommend this product.
Quality
Value
Good piece. Got pretty nicely except near the bottom (hence the 4 stars). Would order again.
Submitted on June 03, 2020 by Ed G.
YES I would recommend this product.
Quality
Value
Fit and quality were very nice. word to the wise. prime and paint! I added sound deadener and used my own hardware. It's a good deal for the money considering not only the cost of steel but the time it would take to trim and fit it.
Submitted on June 20, 2020 by Robert H.
YES I would recommend this product.
Quality
Value
Fit great! Shipped fast and arrived in fine condition.
Submitted on June 29, 2020 by Brock B.
YES I would recommend this product.
Quality
Value
It fit and works perfectly in my 66 Mustang. Super fast shipping which is great! Definitely recommend.
Submitted on September 13, 2020 by Michael A.
YES I would recommend this product.
Quality
Value
Submitted on March 14, 2021 by Larry c.
YES I would recommend this product.
Quality
Value
Fit perfectly in my '65 Ford Mustang. I used some paint prep on it to remove any oils and then gave it a quick coat of primer and paint. Not for looks but to prevent any rust that may occur long term.
Submitted on April 18, 2021 by BRIAN C.
YES I would recommend this product.
Quality
Value
Good fit on my 66 mustang
Submitted on June 08, 2021 by Mark M.
YES I would recommend this product.
Quality
Value
Fits good!
Submitted on October 30, 2021 by TOD B.
YES I would recommend this product.
Quality
Value
68 ford Mustang, hard-top. Fit right in
Submitted on December 27, 2021 by Danny J.
Quality
Value
Fits fairly well for the most part, but the cutouts on the top are pretty sloppy and don’t match the original cardboard (bigger).
Submitted on January 28, 2022 by James E.
YES I would recommend this product.
Quality
Value
took the cardboard out, bent the holding pins for the cardboard back out of the way, replaced with this, drilled holes, put a bead of silicone around the outside, screwed this in and covered with Dynamat, worked great, seems to be keeping some of the pesky gas fumes out of the cabin too. Only things I wish it was a little thicker and had some kind of template for where the screws should go, as I missed with a couple of them :)
Submitted on February 15, 2022 by Billy C.
YES I would recommend this product.
Quality
Value
It fit my 1965 Mustang perfectly no modifications needed. Installation was quick and easy.
Submitted on May 13, 2022 by Richard J.
YES I would recommend this product.
Quality
Value
Really like this product, easy install
Submitted on May 16, 2022 by William G.
Quality
Value
Good strong steel. Cut to shape accurately.
Submitted on June 15, 2022 by Christopher C.
YES I would recommend this product.
Quality
Value
Absolutely love this divider. Is thicker and heavier than expected. Arrived quickly and packaged well. Even came with mounting screws. Installed easily and could not be happier with it.
Submitted on September 01, 2022 by Chuck M.
YES I would recommend this product.
Quality
Value
Received the divider in a well packaged box with some self tapping screws. Fit the panel to the trunk without any issues. Coated the panel in semi gloss Por15. Instead of using the self tapping screws I opted to use rivnuts and stainless steel 1/4x20 button head allen bolts. Looks great and good to have the added protection.
Submitted on December 20, 2022 by Edward M.
YES I would recommend this product.
Quality
Value
Thicker material would be nice
Submitted on February 17, 2023 by Aundre l.
Quality
Value
Adequate but Not as thick as I thought. Easy to install.
Submitted on February 23, 2023 by Leonides N.
YES I would recommend this product.
Quality
Value
Great product shipping was a little rough poked holes through the cardboard box luckily this protected my new dash had to hammer out big dent from what appears to be a forklift hit
Submitted on April 05, 2023 by John T.
Quality
Value
Good product. Gets 4 stars because 5 stars is reserved for "exceeding" expectations. Could have holes punched to help spacing and drilling locations, could have been painted. On the whole, as expected and did not require trimming.
Submitted on May 16, 2023 by Chad H.
YES I would recommend this product.
Quality
Value
Fits nicely with no problems. Just had to drill the holes for mounting it. It didn't come with the screws but I used my own. Use gloves when handling it as the edges are sharp.
Submitted on May 24, 2023 by Mark L.
YES I would recommend this product.
Quality
Value
it fit perfect and easy to install, but It arrive with a bit of rust. I cleaned it and painted.
Submitted on June 06, 2023 by Jose F.
YES I would recommend this product.
Quality
Value
Fit perfectly in my 1967 coupe. No trimming etc. covered in Killmat and I was done.
Submitted on June 06, 2023 by Jesse M.
YES I would recommend this product.
Quality
Value
Fit well without cutting but I chose to trim it down to cover just the large rectangular opening. I welded it in. It just unformed sheet metal so it has a drum sound and will likely need sound deadening.
Submitted on June 13, 2023 by Jeff F.
YES I would recommend this product.
Quality
Value
Perfect fit for my 66 coupe. Probably one of the most important upgrades you can do for safety.
Submitted on February 17, 2024 by John M.
YES I would recommend this product.
Quality
Value
Fit well . Other then being damaged in shipping on one end. Repaired it and primed and painted and covered in sound deadening good to go. Pre fit and drill holes first. Came with more then enough tapping screws.
Submitted on April 02, 2024 by kelly b.
YES I would recommend this product.
Quality
Value
Perfect fit and way better than a piece of press board seperating the cab from the gas tank / trunk and kills the sound. I just used 3M rubberized black paint and screwed it down. The thick paint acted as a gasket to prevent that metal to metal squeak that I was afraid of
Submitted on April 12, 2024 by Jeff T.
YES I would recommend this product.
Quality
Value
Good value for the price. The steel is good thickness but the edges are sharp and care must be used when maneuvering it into the car. It fit fine, it slid in underneath the upper seat mounts tightly, the screws provided worked perfectly to attach it to the car, I used black silicone sealant to seal it to the car and provide insulation eliminate noise. Good installation, no issues at all.
Submitted on August 09, 2024 by Ron M.
YES I would recommend this product.
Quality
Value
The metal Is to thin.
Submitted on September 02, 2024 by Robert D.
YES I would recommend this product.
Quality
Value
It's definitely better than the cardboard original. Have not driven with it in yet, but have dynamated the entire inside of my 65. It fit without any modifications.
Submitted on November 14, 2024 by Edward C.
YES I would recommend this product.
Quality
Value
This is a great part for what I used it for. Looking at past improvements for my car, I thought it was a relatively cheaper alternative than buying a weld in alternative. Its also great that I was able to clean up my trunk by hooking my amp to it.
Submitted on November 24, 2024 by Mitchell W.
YES I would recommend this product.
Quality
Value
In Stock!