RADIATOR, Max Core by ACP, brass and copper construction, 3 row, 1/2 inch tubes, 99 cores, 14 fins per inch, 16 7/8 inch core width x 16 3/8 inch core height x 2 inch core thickness, inlet 1 1/4 inch RH, outlet 1 1/4 inch LH, 6 inch trans cooler, ** MAY NEED DIFFERENT FITTINGS FOR A/T, front mount, See 8149-1B for fan shroud brackets and 8006-1K, 8006-1AK for mounting hardware options, OE mounting, 1 year manufacturers warranty, Extremely efficient, Note: Thicker than original radiators may require a shorter fan spacer, Check for a minimum of 1/2” clearance (1” preferred) between the fan and radiator core BEFORE you start your engine! The use of a different length of fan spacer can easily remedy this, Thicker than original radiators may also need modifications to the saddle mounts to fit the thicker tanks and for the location of the drain cocks. 67’s using 24” extra cooling radiators, brass or aluminum, will require the use of 68-70 lower mounts (8052-1A, 1B, 1C) for a proper mounting, Aluminum radiators and heater cores require 50/50 mix coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion in aluminum.
NPD Part Number : 8005-1BE Manufacturer Reference #'s: FM-ER002, C5ZZ-8005-C
1965-1966 MUSTANG 170, 200
1960-1965 FALCON 144, 170, 200
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Haven't installed it yet, but was pleased to know that you had a higher rated radiator available! Thanks.
Submitted on May 22, 2019 by Lucius B.
Quality
Value
Submitted on June 17, 2021 by Donald w.
YES I would recommend this product.
Quality
Value
Very happy solved my cooling problem!
Submitted on August 27, 2021 by Mike W.
YES I would recommend this product.
Quality
Value
In Stock!
