Radiator, Vista-Pro Ready-Rad, Brass and Copper, 3 row

2 row* (read core note below) with 5/8 inch tubess. 80 tubes, 16 fins per inch. 20 1/4" core width x 16 3/8" core height x 1 1/2" core thickness. Inlet 1 1/2" RH, outlet 1 3/4" LH, 6" trans cooler. Front/saddle mount. OE styled replacement radiator by Thermal Solutions whose radiator roots goes back to Modine, the original supplier to Ford. Copper brass construction with soldered cores and internal reinforcements at the critical connections.

*Core note: These were 3 row with 3/8 tubes. They are now 2 row with 5/8 tubes and 1 1/2 total core thickness. Same cooling capacity, just with a different core arrangement.

Note: Thicker than original radiators may require a shorter fan spacer. Check for a minimum of 1/2 clearance (1 preferred) between the fan and radiator core BEFORE you start your engine! The use of a different length of fan spacer can easily remedy this. Thicker than original radiators may also need modifications to the saddle mounts to fit the thicker tanks and for the location of the drain cocks. 67s using 24 extra cooling radiators, brass or aluminum, will require the use of 68-70 lower mounts (8052-1A, 1B, 1C) for a proper mounting. Aluminum radiators and heater cores require 50/50 mix coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion in aluminum.

Ford Mustang Years:
1967 (67), 1968 (68), 1969 (69)
Above years shown are used for searches and are not application listings.

Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69)
Above years shown are used for searches and are not application listings.

NPD Part Number : 8005-1E2
Manufacturer Reference #'s: 0433340,