2 row, 1/2 tubes, 62 cores, 12 fins per inch. 20 1/4 core width x 16 1/2 core height x 1 1/4 core thickness. Inlet 1 1/4" RH, outlet 1 1/4" LH, 6" trans cooler. Front/saddle mount. OE styled replacement radiator by Thermal Solutions whose radiator roots goes back to Modine, the original supplier to Ford. Copper brass construction with soldered cores and internal reinforcements at the critical connections.
See 8006-2AK, 8006-2CK, 8006-3AK, 8006-3CK for mounting hardware options.
Note: Thicker than original radiators may require a shorter fan spacer. Check for a minimum of 1/2 clearance (1 preferred) between the fan and radiator core BEFORE you start your engine! The use of a different length of fan spacer can easily remedy this. Thicker than original radiators may also need modifications to the saddle mounts to fit the thicker tanks and for the location of the drain cocks. 67s using 24 extra cooling radiators, brass or aluminum, will require the use of 68-70 lower mounts (8052-1A, 1B, 1C) for a proper mounting. Aluminum radiators and heater cores require 50/50 mix coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion in aluminum.
Ford Mustang Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
NPD Part Number : 8005-1D Manufacturer Reference #'s: 0433329,
1967-1968 MUSTANG 200
1969-1970 MUSTANG 200
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Perfect fit, didn't have to change anything.
Submitted on February 05, 2022 by Dennis C.
YES I would recommend this product.
Quality
Value
Good quality product
Submitted on May 31, 2022 by Thomas B.
YES I would recommend this product.
Quality
Value
In Stock!
