PRESSURE PLATE AND DISC KIT, Centerforce, 11 inch x 1 1/16 inch-10, You must resurface your flywheel prior to the installation of any clutch and replace your pilot bearing (7600), Check flywheel for signs of heat spots, warping or cracks and replace any questionable ones, new flywheels, including SFI certified flywheels can be found in the engine section or by searching for “flywheel”, It is possible to install a 10.5 inch clutch in place of any 10 inch clutch as the Long style pressure plate mounting bolt pattern is the same, It is advisable to us thread locker on the pressure plate mounting bolts and torque to spec in the proper sequence
NPD Part Number : 7563-12B Manufacturer Reference #'s: Centerforce CNF DF226033,
1965-1973 MUSTANG 390, 11 INCH X 1 1/16 INCH-10
1967-1969 COUGAR 390
1984-1987 F150-F350 (BEFORE MID-87), 7.5L, 11 INCH X 1 1/16 INCH-10
1968-1969 TORINO 390, 11 INCH X 1 1/16 INCH-10, NOTE: NOT FOR 11.5 INCH ORIGINAL APPLICATIONS
1966-1969 FAIRLANE 390, 11 INCH X 1 1/16 INCH-10, NOTE: NOT FOR 11.5 INCH ORIGINAL APPLICATIONS
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Perfect fit for an original 68 S-Code. No interference with bell housing. Clutch is probably the best clutch I’ve felt in one of these cars.
Submitted on August 31, 2020 by Antonio H.
YES I would recommend this product.
Quality
Value