PREMIUM CLUTCH SET, RAM Powergrip HD, New Manufacture, Super HD for up to 650 hp, 10.5 inch x 1 1/8 inch 26 spline, 8 spring hub. Diaphragm style pressure plate and 5.0L mounting pattern. For applications up to 650 hp. Requires 157 tooth flywheel. Kit includes pressure plate, disc, throw out bearing and alignment tool, Changing to a diaphragm style pressure plate may require the removal of your clutch pedal return spring located under the dash. RAM clutch sets have a 5 year / 50,000 mile limited warranty (proof of flywheel resurfacing is required). See M-7563-6FRK for mounting kit. You must resurface your flywheel prior to the installation of any clutch and replace your pilot bearing (7600). Check flywheel for signs of heat spots, warping or cracks and replace any questionable ones. new flywheels, including SFI certified flywheels can be found in the engine section or by searching for flywheel. It is possible to install a 10.5 inch clutch in place of any 10 inch clutch as the Long style pressure plate mounting bolt pattern is the same. It is advisable to us thread locker on the pressure plate mounting bolts and torque to spec in the proper sequence
NPD Part Number : 7550-13AKA Manufacturer Reference #'s: RAM 98794HDT,
1965-1973 MUSTANG 86-95 5.0L, TREMEC TKO SEREIS OF TRANSMISSIONS, W DIAPHRAGM STYLE CLUTCH PLATE MOUNTING PATTERN ON FLYWHEEL
1986-1993 MUSTANG 5.0L, INCL COBRA
1967-1973 COUGAR 86-95 5.0L, TREMEC TKO SEREIS OF TRANSMISSIONS, W DIAPHRAGM STYLE CLUTCH PLATE MOUNTING PATTERN ON FLYWHEEL
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In Stock!
