Without reservoir. 5/8" diameter rear male pressure port fitting, C7OZ-3A674-A, HBA-BF, HBA-BF1, C9OZ-3A674-A, HBA-BK.
See 3A674-1AK, 3A674-1BK, 3A674-2AK, 3A674-2BK, 3A674-3AK, 3A674-3BK, 3A674-3DK, 3A674-3EK, 3A674-3FK, 3A674-4AK, 3A674-4BK, 3A674-4CK, 3A674-4DK, 3A674-4EK, 3A674-4FK, 3A674-5AK, 3A674-5BK, 3A674-6AK for mounting hardware options.
Please note that it is a good idea to support the reservoir retainer nut while tightening the pressure hose to the pump. Although the manufacturer has made internal changes to make the likely hood of tearing the inner seal less common. It is still a good practice to to support the nut to prevent the motor from shifting inside the housing and ensure a good tight fluid seal .
**You must flush the PS system anytime components are replaced to eliminate any contamination and to validate manufacturers warranties. Many transmission fluids available on the market do not meet manufacturer minimum standards for friction, viscosity, corrosion or wear, In fact Cardone, the largest supplier of rebuilt power steering components, has found the cause of many power steering related failures can be traced back to low quality fluid, Dont risk your restoration on a budget brand fluid. See 19582-2 for Motorcraft brand Type F fluid for use in vehicles that specify type F in the P/S system up to 1995. **
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
NPD Part Number : 3A674-2B Manufacturer Reference #'s: C7OZ-3A674-A, HBA-BF, HBA-BF1, C9OZ-3A674-A, HBA-BK
1965-1966 MUSTANG 6 AND 8 CYL., FORD PUMP AS REPLACEMENT WITHOUT RESERVOIR
1967-1967 MUSTANG 289, 390
1968-1969 MUSTANG 8 CYL.
1970-1970 MUSTANG 428
1967-1968 COUGAR
1969-1969 COUGAR 351W
1969-1969 COUGAR 390, 428
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The pump works well as a replacement for the OEM. The provided seal for the pressure port stem to canister, located at the back of pump, is much thinner than the OEM and will leak. I had to take everything apart again and coat the gasket with gasket seal to stop the leak. As to the value, pricing was higher than other vendors for the same manufacture. Additionally, the core refund and return process is antiquated.
Submitted on September 17, 2024 by Michael R.
YES I would recommend this product.
Quality
Value
In Stock!