Polyurethane cab body mount bushing kit, Black, Energy Suspension, (12)

BUSHING KIT, Cab Body Mount, Polyurethane, Black, Energy Suspension, (12), does not include hardware

Upgrade and replace all of the degraded cab body mount rubber bushings on your vehicle with this brand new Energy Suspension 12-piece polyurethane bushing kit. Polyurethane bushings are stronger than original rubber mounts that were too soft and over time would crack, distort, dry out or often fall off. Polyurethane bushings improve your ride comfort, prevent harsh vibrations no matter how demanding the drive, while providing greater resistance to deterioration from road grime, oil leaks, and salt slush. Kit contains six top body mount bushings, six bottom body mount bushings and installation instructions. Does not include hardware.

Installation Note:

When disassembling the body mounts, be sure to note the number and position of shims that may have been used to align the body. These shims will have to be reused to retain proper body alignment. Remove all the body mount bolts on one side of the vehicle. Loosen but do not remove all the body mount bolts on the opposite side of the vehicle. Only raise one side of the vehicle at a time, lifting the body only high enough to remove/replace the mounts. Always watch the fan shroud, brake lines, and various hoses for sufficient clearance when raising the body. When jacking the body, use a 2x4 or equivalent to spread the weight. Never place jack faces directly on body panels! When all mounts and hardware are installed, torque all bolts to factory specifications.

Chevrolet C / K 1/2-Ton Pick-Up Years:

1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87)