FoMoCo script oval and C8AZ-6A664-D part number properly ink stamped in white. Correctly formed 90 bends. Cut hose as required. These were painted Ford blue along with the rest of the engine. Dual outside diameter hose: 13/16 inch O.D. & 3/4 inch O.D. x 5/8 inch I.D hose. This hose will require both 6A664-2K and 6A664-6AK clamp kits.
For 64-66 Mustang, Falcon and Fairlane: This hose can be used but needs to be modified slightly by trimming both ends slightly and removing the ink stamps as originals were only marked 78FH. When installing, you will need to twist the hose 90 to mate up with the carb spacer and PCV valve. The larger diameter hose end goes to the carb spacer and the small diameter goes to the PCV valve.
See 6A664-2K, 6A664-6AK for hose clamp options.
Ford Mustang Years:
1965 (65), 1966 (66), 1968 (68), 1969 (69)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1968 (68), 1969 (69),
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1964 (64), 1965 (65), 1966 (66)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1964 (64), 1965 (65), 1966 (66)
Above years shown are used for searches and are not application listings.
NPD Part Number : 6A664-3A Manufacturer Reference #'s: C8AZ-6664,
1968-1969 MUSTANG 428
1968-1969 COUGAR 427, 428
1968-1969 TORINO 390
1968-1969 FAIRLANE 390
1965-1966 MUSTANG (BEFORE 5/2/66), 260, 289
1964-1966 FALCON (BEFORE 5/2/66), 260, 289
1964-1966 FAIRLANE (BEFORE 5/2/66), 260, 289
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Very good part did not fit my vehicle but it wasn't supposed to , it was cut to length and fit perfectly.
Submitted on April 13, 2020 by Bart V.
YES I would recommend this product.
Quality
Value
I had to trim it to fit my application, probably because I am using a police interceptor manifold, but overall it is a nice product.
Submitted on August 16, 2020 by David G.
Quality
Value
Submitted on January 21, 2022 by Donald R.
YES I would recommend this product.
Quality
Value
Very nice reproduction, fits really well, diameters (id and od.are good).
Submitted on April 19, 2024 by Ron H.
YES I would recommend this product.
Quality
Value
Not exact fit for my application (1969 Mach 1 428 SCJ) but it looked exactly like the product displayed. I was able to cut off the turn up on one end so it looked like an enlongated “L” to fit.
Submitted on November 04, 2024 by Oscar F.
YES I would recommend this product.
Quality
Value
In Stock!
