Repro. Each. Located between shoes. 2 required. See also 2A601 link spring.
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1962 (62), 1963 (63), 1964 (64), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Torino and Ranchero Years:
1968 (68), 1969 (69), 1970 (70), 1971 (71)
Above years shown are used for searches and are not application listings.
NPD Part Number : 2A642-2A Manufacturer Reference #'s: ST2A643, C2OZ-2A642-A, D1OZ-2A642-A
1965-1973 MUSTANG 10 INCH BRAKE
1967-1973 COUGAR
1962-1964 FALCON 10 INCH BRAKE
1970-1970 FALCON (FROM 1/1/70), 10 INCH BRAKE
1968-1971 TORINO 10 INCH BRAKE
1964-1970 FAIRLANE 10 INCH BRAKE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Ends are a little different from original however work fine.
Submitted on May 01, 2020 by Craig C.
YES I would recommend this product.
Quality
Value
Good quality
Submitted on August 07, 2020 by Dave C.
YES I would recommend this product.
Quality
Value
Did the trick..just like the old ones..fast shipping....
Submitted on January 14, 2021 by Michael G.
YES I would recommend this product.
Quality
Value
this bar was not the same size as NOS bars and installation of it will not allow the brake drum to fit on. I replaced it with an original bar I found and the drum slipped on with no problems. This issue cost me about 3 hours trying to determine the cause of the problem.
Submitted on March 18, 2022 by Dave O.
Quality
Value
had to grind about .030 from slot at either end to fit to shoe and lever slots. Otherwise works well.
Submitted on April 09, 2024 by Mark A.
YES I would recommend this product.
Quality
Value
Works as it should after grinding a bit from the inside forks.
Submitted on July 21, 2024 by Jerry H.
YES I would recommend this product.
Quality
Value
In Stock!
