Includes all necessary parts. A fairly correct kit for 69 Mustang excluding lanyards (incorrect crimps). 3 11/16” pin OAL. 2” thread length. See 16N782-1AK for mounting hardware options.
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1960 (60), 1961 (61), 1962 (62), 1963 (63), 1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Torino and Ranchero Years:
1968 (68), 1969 (69), 1970 (70), 1971 (71)
Above years shown are used for searches and are not application listings.
Ford Thunderbird Years:
1955 (55), 1956 (56), 1957 (57)
Above years shown are used for searches and are not application listings.
Ford Bronco Years:
1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77),
Above years shown are used for searches and are not application listings.
Ford Mustang Fox Body and SN-95 Years:
1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93)
Above years shown are used for searches and are not application listings.
NPD Part Number : 16700-1A Manufacturer Reference #'s: Ford Performance Parts M-16700-A, C9OZ-16700-A
1965-1973 MUSTANG ACCESSORY, WORKS FOR ALL YEARS, TIGHT ON 65-66 IF MOUNTED TO THE HOOD BUMPER BRACKETS, SEE 16700-8
1969-1969 MUSTANG VERY CLOSE
1979-1993 MUSTANG
1969-1969 COUGAR
1966-1977 BRONCO WITH FIBERGLASS HOODS
1969-1969 TORINO EXCL TALLEDEGA
1969-1969 FAIRLANE EXCL TALLEDEGA
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
I live 5 hours from the NPD California depot, yet it takes a full week for delivery. I needed this kit to replace older OEM Ford parts that finally broke and started rusting. There is not one piece of this kit that is as good as the Ford OEM parts. Another garbage aftermarket product.
Submitted on February 23, 2019 by Mike G.
Hello Mike,
We are sorry that you are disappointed. But please be advised that these kits COME FROM FORD. They are distributed through Ford Racing. MCA judging deems them concours-correct, except the crimps on the lanyards are too big and incorrect. We realize that old/NOS Ford service parts are more correct, and doing a "proper" reproduction is a project that we're looking at doing.
Quality
Value
One of the closest reproduction screw kits. Only wish it came with the screw to hold the lanyard to the vehicle.
Submitted on June 02, 2022 by Steven M.
YES I would recommend this product.
Quality
Value
Very nice product and easy to install, A+
Submitted on December 02, 2022 by Rhonda G.
Quality
Value
Nice set.
Submitted on February 04, 2023 by Kenneth B.
YES I would recommend this product.
Quality
Value
Excellent fit! Took exact place of original equipment and fit perfectly. Easy assembly.
Submitted on March 02, 2023 by Joe N.
YES I would recommend this product.
Quality
Value
Great replacement for OEM parts. The cable was a bit difficult to straighten and I needed to bore out the holes on the backing plates for the clip guards.
Submitted on July 16, 2023 by John O.
YES I would recommend this product.
Quality
Value
The hood hardware is great. The cables not so much. Bulky large diameter. Don't look good. Ended up taking the cables off another set..
Submitted on October 11, 2023 by Bruce B.
YES I would recommend this product.
Quality
Value
Hood pin kit for 1969 Mach 1 Mustang.... Overall I'm pleased with this kit....It's the closest thing that I've found to the original Ford hood pins..... Well worth the money....
Submitted on October 31, 2024 by Ron W.
YES I would recommend this product.
Quality
Value
In Stock!
