STRAP, GAS CAP, GRAY PLASTIC, INCL CORRECT MOUNTING HOLES, OE STYLE REPRO
Is you original gas cap seen better days? Are you tired of having to figure out a place to put your broken gas cap because of a missing or broken strap? Well NPD has you covered with this exact reproduction gas cap strap. This strap is designed to be an exact copy of the original unit and is molded in the correct gray plastic as well as having the same injection molding ports on the backside. This unit is designed to work with all factory style gas caps that were offered from 1982 thru 1990. So, if you are tired of setting your gas cap on the roof of your Foxbody or if you are looking to take your restoration to the next level, then look at picking up one of these units from NPD today!
Restoration Note:
Since the original Ford books do not state what color strap was properly used NPD has offered these straps in both gray and black finishes to have both options covered. NPD research has has shown that most early Foxbody Mustangs before 1987 featured the gray strap. After 1986 Ford / Motorcraft went to black strap. Please note that your original gas cap could have been swapped or changed over the year. See NPD part number M-9S030-3A for correct black style strap.
Installation Note:
NPD has gone to great length to ensure that these straps fit as best as possible. Some light sanding on the inner circle may be required to ensure that the cap can spin freely in the strap. Ford / Motorcraft had varying tolerances on the cap size. If sanding is required this should be very minimal and be covered by the cap flange. Also note that the injection molding ports should be installed facing down from the top of the cap. This was how the factory installed them. Some light pressure or color change may happen on the first few times it is bent.
Note:
Ford Mustang Years:
1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90)
NPD Part Number : M-9S030-3G Manufacturer Reference #'s: E2ZZ-9S030-G, M-9S030-3G
1982-1990 MUSTANG
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Fit is perfect, looks like the original.
Submitted on January 06, 2023 by curtis b.
YES I would recommend this product.
Quality
Value
I ordered the Gray for my 1984 Mustang. The Original gas cap fits really tight in this, so I went ahead and ordered a Ford Official gas cap and removed the single strap and fitted this one. Fit was perfect with a new gas cap.
Submitted on January 27, 2023 by William W.
YES I would recommend this product.
Quality
Value
I had to struggle to get this on my cap for my 1985 Mustang GT. Even after getting it on, the cap wouldn't spin. I had to spend about an hour sanding the inner circle opening to get it to fit.
Submitted on April 02, 2023 by Paul K.
YES I would recommend this product.
Quality
Value
Nice looking part but they made the hole for the gas cap too small. If you could force it on, you would not be able to spin the cap. Pretty likely to break the new strap. Took me about 10 minutes to carve, grind and scrape to make it bigger. Who reverse engineers these things?
Submitted on July 16, 2023 by Kevin K.
Quality
Value
I cant review this product because I haven't put it on the car yet but I keep getting emails bugging me so I replied
Submitted on August 30, 2023 by Scott s.
Quality
Value
Welcome addition to satisfy a restoration need. I soaked the loop of the strap in hot water to get it soft enough to go over the oem cap. Still a little tight to allow the cap to swivel around, but much cheaper than an NOS part.
Submitted on October 10, 2023 by Matthew R.
YES I would recommend this product.
Quality
Value
Highly recommended. The original strap on my 1986 fuel cap had broken long ago. This strap is a perfect match to the original Yes, you will have to disassemble your original cap and sand the inner circle of the strap to get it to fit smoothly. Took about 10 minutes with some coarse sandpaper. IMG_1196.JPG IMG_1197.JPG
Submitted on November 08, 2023 by Tom C.
YES I would recommend this product.
Quality
Value
Used this on an 86 SVO, but had to file out the inside to fit on the gas cap. Once that was resized for my cap...works as advertised.
Submitted on March 19, 2024 by Harry S.
YES I would recommend this product.
Quality
Value
Great replacement
Submitted on April 25, 2024 by John R.
YES I would recommend this product.
Quality
Value
Very close to the original part, but like the comments pointed out it has to be sanded down to fit.
Submitted on September 26, 2024 by Kevin C.
YES I would recommend this product.
Quality
Value
In Stock!
