NEGATIVE CAMBER WEDGE KIT

NEGATIVE CAMBER WEDGE KIT, Lowers control arm 1 3/4 inch using a supplied template that doubles as a reinforcement plate, Moog ball joint option, Dramatically reduces understeer and tire roll-over thereby improving steering and road feel regardless of the wheels used. Lowering the control arm does lower the car slightly. This kit is designed to re-center the ball joint when the control arm is lowered and negative camber is increased. Requires drilling to relocate upper arm, front suspension disassembly and realignment to supplied specs. Increasing negative camber is one of the best modifications you can do to improve the handling of your Mustang or to enhance the effectiveness of any other suspension or anti-sway bar addition. Recommended when installing any 16 inch or larger diameter wheels. All parts required for installation are included. Negative camber happens when the top of the tire is tilted inward more than the bottom of the tire is. Moog ball joint option is offered by customer requests, Moog ball joints have the grease zerk in a position where it will not align with within the available space in the control arm making greasing the ball joint after installation impossible without modifications to the control arm and/or wedge spacer by the end user not covered in the instruction sheet, User assumes all responsibility for all modifications,

NPD Part Number : 3A049-2AM
Manufacturer Reference #'s: National Parts Depot 3A049-2AM,