NEGATIVE CAMBER WEDGE KIT, Lowers control arm 1 1/4 inch using a supplied template that doubles as a reinforcement plate. Dramatically reduces understeer and tire roll-over thereby improving steering and road feel regardless of the wheels used. Lowering the control arm does lower the car slightly. This kit is designed to re-center the ball joint when the control arm is lowered and negative camber is increased. Requires drilling to relocate upper arm, front suspension disassembly and realignment to supplied specs. Increasing negative camber is one of the best modifications you can do to improve the handling of your Mustang or to enhance the effectiveness of any other suspension or anti-sway bar addition. Recommended when installing any 16 inch or larger diameter wheels. All parts required for installation are included. Negative camber happens when the top of the tire is tilted inward more than the bottom of the tire is. User assumes all responsibility for all modifications
NPD Part Number : 3A049-4A Manufacturer Reference #'s: National Parts Depot 3A049-4A,
Product Instructions and Additional Info:
Negative Camber Wedge Kit Installation Instruction1971-1973 MUSTANG 3 BOLT BALL JOINT
1971-1973 COUGAR 3 BOLT BALL JOINT
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
In Stock!
