MONTE CARLO BAR, curved, chrome, good repro, Originally curved to clear the Shelby oval air cleaner the curved version also provides convenient clearance to the distributor cap simplifying maintenance chores, The Monte Carlo bar was originally added to the Monte Carlo raced Falcons and later the 1964 Monte Carlo Mustangs to further reinforce the shock towers by triangulating the support in conjunction with the one piece export brace, The bar keeps the shock towers from collapsing inward and keeps camber adjustments more consistent, When you install this bar you may notice that the bar will not fit in between the aprons, This is due to the shock tower and aprons flexing inward, It may be necessary to spread the shock towers outward to fit the brace and return the towers to their original designed position, Make sure to check your front end alignment after installation, This version has a special LH side plate cut to fit around the apron rib for a perfect fit, Each side bracket has 4 mounting holes, 3 of which are existing holes, 39 7/8 inch between brackets, 0.098 inch (2.5mm) plate thickness including coating, 1 inch O.D. tube with 1.2mm tubing wall thickness, 2.5 lb actual weight, See 29432-1AK for mounting hardware option, See 29432-1AK for mounting hardware option,
NPD Part Number : 29432-8B Manufacturer Reference #'s: FDM1043DC,
1967-1968 MUSTANG 8 CYL.
1967-1968 COUGAR
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Submitted on December 06, 2021 by joe a.
YES I would recommend this product.
Quality
Value
Submitted on March 20, 2022 by Steven T.
YES I would recommend this product.
Quality
Value
In Stock!