LINE SET, Dual Bowl Master Cylinder Conversion, carbon steel, pair of prebent lines, plug and union, 1/2-20 inverted flare master cylinder side x 3/8-24 inverted flare distribution block side,3/8-24 inverted flare master cylinder side x 3/8-24 inverted flare distribution block side, This conversion assumes you have a brake pedal mounted brake switch, Made specifically to be used with the 1967 Mustang 1 inch power disc brake master cylinder 2140-4A, By Classic Tube, All required flared fitting ends are SAE grade double flared, Lines are CNC bent in either carbon steel or in stainless steel for improved durability or show, Tubing is US-made SAE J526 spec. Carbon tubing has a galvanized type top coating that simulates the original Terne coating, ASTM B117 salt spray test is 3000 hours where originals only passed 250 hours, Stainless steel lines have an S at the end of the part number suffix for easy identification, In regards to the coating applied to carbon steel lines:The original Tinned Bundy Weld "TBW" tubing was originally manufactured by supplier Bundy Corporation, had a corrosion resistant coating called Terne coating, Unfortunately that top coating is no longer available because of a ruling outlawing the lead and tin dip process by the EPA almost 20 years ago, At the end of that time Bundy Corp. was moving that coating process to two of their other plants until finally the enforcement pushed them to comply, At that time Bundy Corp. had already switched to offering a few different aluminum rich coatings that was then the new OEM standard, In the end Classic Tube was successful in sourcing tubing made in the USA that is SAE J 526 specification and has a "galvanized" type top coating that simulates the original Terne coating, You may also be interested in knowing the results of the ASTM B117 salt spray test was only 250 hours for the old Terne coating, This tubing has passed at 3000 hours, Classic Tube does not useAluminized tubing, Zinc plated or the Off-Shore tubingthat the other manufacturers use and have the finishes that people dislike,
NPD Part Number : 2B112-2A Manufacturer Reference #'s: Classic Tube MU-14190-OE,
1965-1966 MUSTANG MANUAL DISC BRAKES W/ DUAL BOWL MASTER CYLINDER & OE PROP VALVE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
If the 7/16" fitting had been on the OTHER line this would have been a drop in fit. Instead I got to rebend one line to fit and buy a generic line to use on the rear brakes.
Submitted on September 25, 2020 by William E.
Quality
Value
In Stock!
