LIGHT ASSY, Map, exact repro, mounts under passenger side dash panel, Dimensionally the same as the original, With the propensity of the original woodgrain overlay to bow this switch may exhibit difficulty moving between on and off positions, See 13786-4AK for mounting hardware options,
NPD Part Number : 13786-4A Manufacturer Reference #'s: C9ZZ-13786-B, C9ZZ-13786-B
1969-1970 MUSTANG DELUXE INTERIOR, MACH 1, GRANDE
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Looks perfect. Nice construction.
Submitted on April 18, 2019 by Phil S.
YES I would recommend this product.
Quality
Value
The switch was flimsy and worked intermittently. Fitment in the OEM bezel did not allow full switch travel so it didn't work.
Submitted on January 25, 2020 by Craig W.
Quality
Value
Just what I needed to finish the interior looks great thanks
Submitted on July 26, 2020 by Randy Q.
YES I would recommend this product.
Quality
Value
A little disappointed with this part. I purchased this along with a new pass side bezel. Like many people indicated The switch is too short. For 60.00 plus dollars I would have expected it would have fit better. The main problem I have is it doesn’t work. I check continuity on the wires and the plug seems to be bad. If I jump around it it works. I willl be contacting NPD soon. I know they will make it right.
Submitted on July 26, 2020 by david n.
YES I would recommend this product.
Quality
Value
As others noted, the switch does seem flimsy and works intermittently. Fit my housing good and was able to operate fine.
Submitted on February 22, 2021 by Jeffrey S.
YES I would recommend this product.
Quality
Value
Exact reolacement
Submitted on July 10, 2021 by jeff p.
YES I would recommend this product.
Quality
Value
One wire fell out of a crimp and the switch has a 1/16th sweet spot in the center where it will actually turn off
Submitted on July 21, 2021 by Tray W.
Quality
Value
The connector of the product did not work, it was necessary to replace it, the product was exported, for this reason it was not possible to return it, obviously these products do not have an operating inspection.
Submitted on August 19, 2021 by Kenneth G.
Quality
Value
The first one I got had the switch screws over tightened and stripped. Installed and checked, switch worked but the light did not turn on when opening the glove box. A quick call to NPD and a new map light was on the way. New one did the trick! The switch gets a 4, NPD gets a 5+ for the no hassle and quick resolution!
Submitted on November 16, 2021 by Don B.
YES I would recommend this product.
Quality
Value
Submitted on February 27, 2022 by Dino Q.
YES I would recommend this product.
Quality
Value
I installed it and the switch did not work. I checked the switch with a meter and it was OK. I provided a ground from the switch terminal and the light came on so I checked the wire from the switch to the dual plug. There is no continuity between the switch and the ground terminal of the dual plug. Defective manufacturing. I am returning it hopefully for a good one.
Submitted on May 11, 2022 by Russell D.
Quality
Value
Fits and works great on 69.
Submitted on May 29, 2022 by Bob B.
YES I would recommend this product.
Quality
Value
Submitted on July 23, 2022 by RON W.
YES I would recommend this product.
Quality
Value
Fit well. My map light was missing. I found the wire from my glove box switch was connected to a wire in another harness and the switch did not do anything. I unplugged it from the harness and plugged it into the single wire connector to this light and now the map light turns on when opening the glove box.
Submitted on January 03, 2023 by Craig R.
YES I would recommend this product.
Quality
Value
Fitment was right on. Yes the light switch is a bit short but I like that better than protruding too far. Issue I had was both connector ends had loose wires internally and I had to cut and replace the connector ends. I'm going to assume it was a fluke part.
Submitted on January 12, 2023 by Curtis F.
YES I would recommend this product.
Quality
Value
nice part for the price
Submitted on February 13, 2023 by Dominick L.
YES I would recommend this product.
Quality
Value
Very nice product. My mustang did not have this option but wire harness had hookup and it will definitely make a difference. Good fit and value
Submitted on January 02, 2024 by John B.
YES I would recommend this product.
Quality
Value
Out of Stock
