Instrument Cluster Case, W/ Factory Gauges, reproduction
Instrument Cluster Case, W/ Factory Gauges, injection molded plastic in blue finish to exact factory dimensions.
Service Replacement Note:
When using this case as a service replacement on 1981 models you will need to retrofit an earlier style speedometer that does not have the 1981 style speed warning indicator.
Chevrolet Camaro Years:
1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81)
1970-1971 CAMARO W/ CLOCK, W/O GAUGES
1970-1980 CAMARO W/ GAUGES
1978-1978 CAMARO W/ CLOCK OR INTERIOR PACKAGE Z54
1981-1981 CAMARO SERVICE REPLACMENT
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Submitted on February 23, 2020 by Kevin l.
YES I would recommend this product.
Quality
Value
Product fit perfectly. Lot's of little screws that require the predrilled holes to be preciously located. Everyone was right on. Form of the piece fit the OEM gauge carrier correctly as well.
Submitted on July 24, 2020 by S B.
YES I would recommend this product.
Quality
Value
Submitted on May 08, 2023 by raul m.
Quality
Value
Pretty good part. Holes in the back that hold printed circuit retainers were too large and would not hold retainers. Other wise great part.
Submitted on May 10, 2023 by keith c.
YES I would recommend this product.
Quality
Value
I purchased this item for my wife’s 1971 Camaro RS along with the lens and black gauge cover. After assembling the three pieces and fitting them together I found the fuel and amp gauge were out of position and partially obscured on the right side. I normally don’t return parts that have a fitment issue as it usually can be resolved. I did some trimming, which I realize makes the part non refundable, but couldn’t get a proper fit. After closer inspection I discovered the carrier did not allow for the guages to mate properly with the black cover. There was a gap of about 1/2” between the fuel and amp guage and the black cover. I did a test fit with the cover and the original carrier with the guages installed and the fit was perfect. I will repair the original carrier with pieces from the aftermarket part.
Submitted on June 23, 2024 by Thomas C.
Quality
Value
Please disregard my one star post regarding the instrument cluster carrier. I did purchase an OER instrument carrier from another vendor with the listed problems, NOT NPD.
Submitted on June 23, 2024 by Thomas C.
Quality
Value
In Stock!
