SWITCH ASSY, Ignition, replacement, includes 7 pin pigtail for splicing into original connector block, Original wire lead must be reused
NPD Part Number : 11572-3A Manufacturer Reference #'s: US-67, D0AZ-11572-A, SW-882, D1AZ-11572-A, D1AZ-11572-B, SW-1038, D4DZ-11572-A, SW-992A
1970-1970 MUSTANG
1971-1972 MUSTANG
1970-1970 COUGAR
1971-1972 COUGAR
1971-1971 TORINO
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Wrong item sent box was right but contents was not .
Submitted on February 07, 2019 by IAN B.
Quality
Value
although the switch had the same seven wires the plug did not fit my harness. I had to cut the plug off and direct connect the wires.
Submitted on May 08, 2020 by Gary W.
YES I would recommend this product.
Quality
Value
Great part. Clear dell directions on how to modify to be used on a 1970. Too bad you have to cut off the pigtail on a new part to make it work.
Submitted on July 06, 2020 by david n.
YES I would recommend this product.
Quality
Value
Will not fit any 70-72, until you splice in your old wires way too short
Submitted on May 04, 2021 by David B.
Quality
Value
The switch has the wrong plug hook up on it. You have to cut off the original and rewire it to the new switch. A pain in the ass.
Submitted on March 22, 2022 by DAVID L.
Quality
Value
.
Submitted on February 14, 2023 by Chad L.
YES I would recommend this product.
Quality
Value
other than the splicing I was warned about in advance , the switch is working
Submitted on August 15, 2023 by Thomas W.
YES I would recommend this product.
Quality
Value
It fits and works, like it says you must splice in your old plug and cut out the new plug.There is a plus if you cut your old switch out close to the switch and cut the new plug out at the plug connector it gives you a couple inches longer wiring.It makes it easier to plug into your old wiring harness.My 1970 Mach 1 old switch had a pink wire and the new switch did not have a pink wire. Your old switch with the pink wire will now go to the green wire with red stripe on the new switch. All the other wires are the same color match up.When dealing with a 54 year old car you have to bend, mend, and then they tend to fit. Thanks to N.P.D and there reviews parts like this make parts fit better with less whinning.
Submitted on May 13, 2024 by James S.
YES I would recommend this product.
Quality
Value
In Stock!
