HOSE, FUEL FILLER PIPE TO TANK, TRIM AS REQUIRED
NPD Part Number : F-9047-7 Manufacturer Reference #'s: D5TZ-9047-A, D5TZ-9047-A
1975-1978 F150-F350 SUPER CAB, W/O EV/EM, AT AFT AXLE TANK
1975-1977 F150, F250 REGULAR CAB, W/O EV/EM, AFT AXLE TANK
1978-1978 F150, F250 REGULAR CAB, W/O EV/EM, AT AFT AXLE TANK
1973-1974 F250 4X2 REGULAR CAB, W/O EV/EM, AT AFT AXLE TANK
1974-1974 F250, F350 SUPER CAB, W/O EV/EM, AT AFT AXLE TANK
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Hoses worked great. Had to trim a couple of inches and almost trimmed too much.
Submitted on November 25, 2018 by Carey W.
YES I would recommend this product.
Quality
Value
I only gave it 3 stars because it looks and feels like a quality product. Two quibbles: first, its a one-size-fits-all, not the model-specific part that I expected, so I had to cut off 4” to make it fit. Second, it didn’t fix my problem, which was a hose that collapsed/kinked and blocked fuel from entering the tank from a gas pump. Grrrrrrr!
Submitted on December 27, 2018 by Robert M.
Quality
Value
Submitted on September 02, 2020 by Jody h.
YES I would recommend this product.
Quality
Value
Submitted on October 01, 2020 by Matthew W.
Quality
Value
Submitted on December 10, 2020 by Furman D.
YES I would recommend this product.
Quality
Value
Great part. Easy install
Submitted on December 24, 2020 by Nicholas M.
YES I would recommend this product.
Quality
Value
Fit my 79 F150 4 x 4 rear tank filler hose, just needed to trim a couple inches off the length.
Submitted on July 09, 2021 by Craig D.
YES I would recommend this product.
Quality
Value
Product works fine. It does say some trimming necessary, which is true. I used the old filler pieces to trim the new hoses to the same length. As a cautionary note, I pushed the vent pipe hose all the way on the nipple to the wall of the tank. Don't do that. Either leave it longer, or trim the end only after you have the tank in place and the metal portion of filler tubes in place, to then trim the hose. Since I tightened hose all the way down prior to that, I was short on the end to connect it to metal filler neck. Had to loosen bed to get in there to loosen hose on tank a little and pull enough off to have enough to connect it to fuel filler tube.
Submitted on March 05, 2022 by Brian E.
YES I would recommend this product.
Quality
Value
Perfect fit, good quality!!!!
Submitted on December 13, 2023 by Edward T.
YES I would recommend this product.
Quality
Value
In Stock!
