HORN ASSY, High Pitch, RH, repro, See 13833-1ASK, 13833-2AK, 13833-4AK, 13833-5AK for mounting hardware options,
NPD Part Number : 13832-3A Manufacturer Reference #'s: C7ZZ-13832,
1967-1968 MUSTANG RH
1971-1973 MUSTANG ** WILL NOT WORK **
1967-1968 COUGAR RH, ** NOT CORRECT **
1971-1973 COUGAR ** WILL NOT WORK **
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
I may have gotten a bad part, but it didn't work. It looked very similar to the original except for the rivets as mentioned. It is also slightly lighter in weight. I think mine didn't pass a quality check since the hole for the mount bolt was not drilled (at all) and the horn itself doesn't make a sound. I tried bench testing it as well as putting it in 2 different 67 mustangs. Assuming this is a one off, I would expect this is the best you can do for a reproduction horn based on how it looks and how the driver side I purchased at the same time sounds (its loud).
Submitted on October 31, 2018 by Brad A.
YES I would recommend this product.
Quality
Value
Bolts right on.
Submitted on December 13, 2018 by Allen K.
YES I would recommend this product.
Quality
Value
Submitted on December 13, 2018 by Charlie J.
YES I would recommend this product.
Quality
Value
Really a nice repro...thanks
Submitted on March 02, 2020 by Donald C.
YES I would recommend this product.
Quality
Value
Wish it would have came with instructions to fit my 1971 Mustang.
Submitted on June 02, 2020 by David L.
YES I would recommend this product.
Quality
Value
Ordered this part as a replacement for a Concours street driven '68 Shelby that I restored. All I had to do was repaint it a low gloss solid black color to cover the new rivets and gasket that was exposed from it being rebuilt.
Submitted on June 30, 2020 by Peter W.
Quality
Value
Easy installation and looks great
Submitted on July 03, 2020 by RICHARD C.
YES I would recommend this product.
Quality
Value
Well they sound good
Submitted on August 17, 2020 by Jene Y.
Quality
Value
I bought these horns for a 1967 Fairlane. They fit and sound great
Submitted on May 11, 2021 by Brian A.
YES I would recommend this product.
Quality
Value
Submitted on June 28, 2021 by Robert G.
YES I would recommend this product.
Quality
Value
Sure looks exactly like the originals, very impressed!
Submitted on July 01, 2021 by Robert E.
YES I would recommend this product.
Quality
Value
Submitted on September 26, 2021 by Ari C.
YES I would recommend this product.
Quality
Value
Excellent sounding horn on a 1972 Ford Maverick
Submitted on November 30, 2021 by MILES V.
YES I would recommend this product.
Quality
Value
Excellent sounding horn on a 1972 Ford Maverick
Submitted on November 30, 2021 by MILES V.
YES I would recommend this product.
Quality
Value
Great part excellent quality!
Submitted on January 16, 2022 by Tod B.
YES I would recommend this product.
Quality
Value
Installed on 73 Mustang very nicely
Submitted on January 18, 2022 by scott j.
YES I would recommend this product.
Quality
Value
Installed easily and correctly. Works great!
Submitted on June 20, 2022 by Steven J.
YES I would recommend this product.
Quality
Value
This horn works but doesn’t have that familiar mustang tone which I am very familiar with. We’ve had mustangs nearly my entire life (since I was 2 and I’m 55 now) so these minor things do make a difference to someone like me. That’s being a little picky. However, the steel tab that mounts to the horn is thin. When I tap the radiator frame near the horn it wiggles a lot. I tried this on the side with the original horn and it was steady…but even that made the new horn shake on the other side. Flimsy. I would have paid the difference (x2) just to get that thicker tab. Tab also had to be modified (rebent) to mount the horn. One star deduction for being flimsy and another for inaccurate tab dimensions.
Submitted on July 27, 2022 by Sandamal S.
Quality
Value
The mounting tab is thin gauge steel and wiggles unlike the original which is thicker. Tap the the radiator and the original horn is steady but this one wiggles. Also the hole is drilled about a 1/8” off and required me to bend the tab and force the bolt in at an angle. How difficult is it to drill a hole in the right spot? How difficult is it to quality check something before it goes out?
Submitted on January 17, 2023 by Sandamal S.
Quality
Value
Works great !!! Fits and looks like original. I would definitely buy this again.
Submitted on September 28, 2023 by Ron W.
YES I would recommend this product.
Quality
Value
It worked perfectly and it looks original too.... I would definitely buy this again...
Submitted on September 28, 2023 by Ron W.
YES I would recommend this product.
Quality
Value
Fit, no issues.
Submitted on October 09, 2023 by Richard P.
YES I would recommend this product.
Quality
Value
Nice but does not mount right for a 71
Submitted on January 14, 2024 by George K.
YES I would recommend this product.
Quality
Value
In Stock!
