Repro. Each. Zinc. 1/2” NPT. Located on intake Manifold. See application notes for specific manifold uses. Most aftermarket intake manifolds have a 1/2” NPT fitting for the heater hose connection. This fitting is designed to fit those manifolds and others.
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1960 (60), 1961 (61), 1962 (62), 1963 (63), 1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Fairlane and Ranchero Years:
1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70)
Above years shown are used for searches and are not application listings.
Ford Torino and Ranchero Years:
1968 (68), 1969 (69), 1970 (70), 1971 (71)
Above years shown are used for searches and are not application listings.
Ford Truck F1, F2, F3, F100, F150, F250, F350, Expedition, Excursion, Lincoln Navigator and Blackwood Years:
1948 (48), 1949 (49), 1950 (50), 1951 (51), 1952 (52), 1953 (53), 1954 (54), 1955 (55), 1956 (56), 1957 (57), 1958 (58), 1959 (59), 1960 (60), 1961 (61), 1962 (62), 1963 (63), 1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93), 1994 (94), 1995 (95), 1996 (96), 1997 (97), 1998 (98), 1999 (99), 2000 (00), 2001 (01), 2002 (02), 2003 (03), 2004 (04), 2005 (05)
Above years shown are used for searches and are not application listings.
Ford Bronco Years:
1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1987 (87), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93), 1994 (94), 1995 (95), 1996 (96)
Above years shown are used for searches and are not application listings.
NPD Part Number : 18599-10 Manufacturer Reference #'s: STD 84776,
1965-1973 MUSTANG 8 CYL., W/ AFTERMARKET INTAKE MANIFOLD AND 1/2 INCH NPT INCH FITTING
1967-1969 MUSTANG 390, ALMOST EXACT USED ON BIG BLOCK INTAKES
1967-1969 COUGAR 390, ALMOST EXACT USED ON BIG BLOCK INTAKES
1967-1973 COUGAR 8 CYL., W/ AFTERMARKET INTAKE MANIFOLD AND 1/2 INCH NPT INCH FITTING
1960-1970 FALCON (BEFORE 1/1/70), W/ AFTERMARKET INTAKE MANIFOLD AND 1/2 INCH NPT INCH FITTING
1948-1979 F1-F350 W/ AFTERMARKET INTAKE MANIFOLD AND 1/2 INCH NPT INCH FITTING
1980-1996 F100-F350 W/ AFTERMARKET INTAKE MANIFOLD AND 1/2 INCH NPT INCH FITTING
1966-1986 BRONCO W/ AFTERMARKET INTAKE MANIFOLD AND 1/2 INCH NPT INCH FITTING
1970-1970 FALCON (FROM 1/1/70), W/ AFTERMARKET INTAKE MANIFOLD AND 1/2 INCH NPT INCH FITTING
1968-1971 TORINO W/ AFTERMARKET INTAKE MANIFOLD AND 1/2 INCH NPT INCH FITTING
1964-1970 FAIRLANE W/ AFTERMARKET INTAKE MANIFOLD AND 1/2 INCH NPT INCH FITTING
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Plating and surface quality look marginal. Part works fine. Would have paid more for a higher quality part. I would recommend with these points.
Submitted on February 29, 2020 by James C.
YES I would recommend this product.
Quality
Value
Exactly what I needed and very nice quality!
Submitted on April 19, 2020 by Edward B.
YES I would recommend this product.
Quality
Value
Submitted on May 28, 2020 by Dominick L.
YES I would recommend this product.
Quality
Value
Happy with this product.
Submitted on October 11, 2020 by Jim S.
YES I would recommend this product.
Quality
Value
Works like it should.
Submitted on October 11, 2020 by Dennis M.
YES I would recommend this product.
Quality
Value
Submitted on April 20, 2022 by Al B.
YES I would recommend this product.
Quality
Value
Was to big didn’t fit
Submitted on May 15, 2022 by Tyrone R.
Quality
Value
Submitted on August 22, 2023 by Rodney B.
YES I would recommend this product.
Quality
Value
Submitted on May 02, 2024 by Keith M.
YES I would recommend this product.
Quality
Value
In Stock!