Extended length tubes extend into engine compartment making installation and removal of the heater box much simpler. 9 wide x 5 15/16 tall x 1 11/16 thick overall plus tubes. Does not include 18500 end seals which will NOT fit this replacement aluminum core. Ends seals will need to be fabricated.
Aluminum radiators and heater cores require coolant replacement at least every 24 months or 30,000 miles to maintain the necessary silicate levels that prevent corrosion. **
Ford Mustang Years:
1965 (65), 1966 (66), 1967 (67), 1968 (68)
Above years shown are used for searches and are not application listings.
Mercury Cougar Years:
1967 (67), 1968 (68)
Above years shown are used for searches and are not application listings.
Ford Falcon and Ranchero Years:
1960 (60), 1961 (61), 1962 (62), 1963 (63), 1964 (64), 1965 (65)
Above years shown are used for searches and are not application listings.
Ford Truck F1, F2, F3, F100, F150, F250, F350, Expedition, Excursion, Lincoln Navigator and Blackwood Years:
1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79)
Above years shown are used for searches and are not application listings.
Ford Bronco Years:
1978 (78), 1979 (79)
Above years shown are used for searches and are not application listings.
NPD Part Number : 18476-1B Manufacturer Reference #'s: C5DZ-18476-ET, C5DZ-18476-A
1965-1966 MUSTANG
1967-1968 MUSTANG W/O A/C
1967-1968 COUGAR W/O A/C
1960-1965 FALCON
1973-1979 F100-F350 STANDARD HEATER W/ A/C
1978-1979 BRONCO W/ A/C
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Very nice quality. Easy install. Ford should have used this design from the get-go.
Submitted on September 25, 2018 by Glenn P.
YES I would recommend this product.
Quality
Value
Leaked as soon as I filled up the radiator.
Submitted on September 26, 2018 by Allen K.
Quality
Value
Submitted on October 11, 2018 by Tom M.
YES I would recommend this product.
Quality
Value
Fits great and makes leak checking at hose connections a lot easier.
Submitted on May 07, 2019 by Christoph M.
YES I would recommend this product.
Quality
Value
haven't verified functionality yet but it fits perfectly and sure is nice to have extension through the firewall.
Submitted on May 15, 2019 by kevin K.
YES I would recommend this product.
Quality
Value
I have yet to install this heater core, however, it looks to be sturdy and well constructed. I like the extended tubes allowing me to more easily remove the core. I've owned my '68 Mustang for its entire life, so I'm very well versed with changing out this unit. It's always a pain in the ass.
Submitted on January 23, 2020 by Roy M.
YES I would recommend this product.
Quality
Value
I can’t write a review because l haven’t received the my order yet
Submitted on August 02, 2020 by Dennis K.
YES I would recommend this product.
Quality
Value
Fit and works great
Submitted on April 27, 2021 by K R.
YES I would recommend this product.
Quality
Value
Great product. Love having the extra length pipe.
Submitted on June 13, 2021 by Dana B.
YES I would recommend this product.
Quality
Value
Good replacement and the extended tubes makes it easier to install than the stock/OEM version. Been 6 months and no leaks and works great. Heater blows HOT. Since I was in there (heater core area), I also purchased the gasket kit for the vents and refreshed those ("when in Rome" HAHAHA!!)
Submitted on July 02, 2021 by Mike G.
YES I would recommend this product.
Quality
Value
I have installed this in my heater box and it rattles around quite a bit. The factory rubber end caps don't fit according to the description. Any suggestions on what to put in the heater box to support it? I also feel that some rubber hoses should be put over the long tubes where they protrude through the firewall to prevent metal to metal contact. The longer tubes are a great idea. Too bad that there aren't any factory type cores that are made of copper/brass that have this feature and work with the factory end caps..
Submitted on July 18, 2022 by David L.
YES I would recommend this product.
Quality
Value
Fits and works ok but a little pricey.
Submitted on March 23, 2024 by Nicholas D.
YES I would recommend this product.
Quality
Value
Product was of good quality and fairly easy to install.
Submitted on May 18, 2024 by Dwight K.
YES I would recommend this product.
Quality
Value
In Stock!
