HEADLINER, Original Style, Moonskin Grain, black, The Moonskin grain style is an exact duplicate of the original and utilizes anti-microbial thread throughout it construction, The material itself is mildew resistant and they are matched to the original pattern for an exact fit that is easy to install, Use HLG-1 or 3M8080 adhesive, Sail panel material is not included, Our headliners are manufactured for the serious restorer and are intended to last as long or longer than than the original product, Any trim shop professional will tell you, headliners that are made properly not only takes less time to install than a bargain brand, it looks better and lasts longer, This difference in quality translates directly into dollars when a trim shop has to re-stitch improperly sewn seams that rip during installation; or make adjustments to fit poorly built patterns, Expect professional results when you install the Mustang headliners built for the serious restorer, Manufactured with close attention paid to proper stitching with correct spacing between the pleats, correct bow rod sleeves and design features, When you consider the cost savings of installing only the finest headliner, This stands out as the clear choice,
NPD Part Number : HF-90-A Manufacturer Reference #'s: TMI 20-7259-754,
1969-1970 MUSTANG FASTBACK
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
I was pleasantly surprised at the good quality of this headliner. The black color is very dark and consistent as it should be. It's very durable. I was able to pull it nice and snug during install without any tearing or threads pulling apart. There's plenty of material for installing which allowed me to cut away any extra after I installed it. (There is no extra material for covering the sail panels.) FYI, I wasn't able to get it to stick using headliner adhesive from a spray can. It wouldn't stick to the white, backing fabric and simply fell away the next day after I removed the clamps I used for installation. Black weatherstripping adhesive worked much better.
Submitted on August 06, 2018 by Patrick G.
YES I would recommend this product.
Quality
Value
Great product!
Submitted on October 22, 2019 by Gary R.
YES I would recommend this product.
Quality
Value
Good fit and finish. Strong. I used a heat gun on the fold wrinkles from being in the box before installing. I pulled very hard on it with no damage during install. I used the NPD rubber cement. I installed the bows, trimmed the sleeves back, installed the bows and headliner. Glued it in at back window, pulled it tight and glued at windshield, then pulled the sides and glued. I bought the NPD sail panels and courtesy lights and they fit perfect.
Submitted on January 28, 2021 by Bob C.
YES I would recommend this product.
Quality
Value
I also purchased the following items for a complete 1969 fastback headliner project: Item # 52018-0A SAIL PANELS, QUARTER TRIM, ROOF C PILLAR, NICE! Item # 52018-3AK MOUNTING KIT, SAIL PANELS, SPRING CLIPS Item # 513A40-3A INSULATION, ROOF C-PILLAR FASTBACK SAIL PANEL Item # 13776-1A INTERIOR LIGHT, QUARTER SAIL PANEL Item # 02600-1A WINDLACE, BLACK Item # VC-13-A SUN VISOR, BLACK Item # 04110-2A SUNVISOR CHROME BRACKET SET Item # 04132-2A BRACKET, SUN VISOR ROD CENTER Item # 51915-1B INSULATION PADS, ROOF HEADLINER FASTBACK Item # 29024-1A COVER, ROOF COAT HOOK Item # 29232-1A RETAINER, COAT HOOK Item # HLG-1 HEADLINER GLUE W/ INSTRUCTIONS
Submitted on January 29, 2021 by Bob C.
YES I would recommend this product.
Quality
Value
the black is not truly black ! in light in color then my old faded oem one so but tmi has lost it
Submitted on September 28, 2022 by Donald w.
Quality
Value
In Stock!
