HEADLINER, GRAY (OPAL), FOAM BACKED CLOTH COVERED ABS PLASTIC, COLORS ARE NOT EXACT TO ORIGINAL BUT ARE CLOSE
NPD Part Number : F-51944-23E Manufacturer Reference #'s: AFH8796-2000,
1987-1996 F150-F350 SUPER CAB
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Submitted on January 16, 2020 by Ronald W.
YES I would recommend this product.
Quality
Value
The colors are very close, but not exact--just like the ad says. Not a big deal because from factory the colors aren't identical anyways. Insights I have: -Make sure to unpackage it immediately, if possible, and let sit out and warm up. The ABS doesn't seem thick in the package, but it is very thick trying to install it. -CLEAN YOUR HANDS before installing this otherwise you'll make your headliner dirty. -There's lots of excess material, and you have to cut the holes out yourself. Complaints: -The holes could be oversized a little more. The visor holes and dome light holes could have been expanded quite a bit more, because those pieces take up way more space. This, paired with poor tolerances and variance with each vehicle, make it hard to line up, if not impossible. I had to drill some holes to make it work, especially the three visor screw holes. Put the visors and dome light against the holes and see for yourself--the holes could've been 10-15% larger, allowing for easier install, and still be COMPLETELY hidden by the trim that covers it. -XLT models (I believe, if not all) have a coat hanger above the LR supercab window. This headliner does not have provisions for this hole. You have to put the headliner up, mark where it needs to be removed, remove the headliner and cut the ABS, or try to cut it in the vehicle, or just not install the coat hanger. -The relief slats in the corners make for an eyesore. Not a big deal to me, but if using this headliner for a restoration, etc, beware that there will be creasing and bunching up in the corners.
Submitted on September 24, 2023 by Sean Q.
YES I would recommend this product.
Quality
Value
In Stock!
