Original. Each. Argent painted insert. Be careful installing the sheet nut on to the stud. The self threading aspect puts stress on the pin and over torqing can sheer the pin. Pre-threading the nut off the car can help alleviate the potential problem. This situation also plagued original covers.
Ford Mustang and Shelby Years:
1966 (66)
Above years shown are used for searches and are not application listings.
NPD Part Number : 8221-1A Manufacturer Reference #'s: FDM1070GG-DII,
1966-1966 MUSTANG
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Only reason for 4 stars is it is too narrow to work with the trim that I have. Not sure why.
Submitted on December 17, 2018 by john s.
YES I would recommend this product.
Quality
Value
HAD TROUBLE GETTING IT PUT ON BUT LOOKED GOOD.
Submitted on April 10, 2020 by Judy P.
Quality
Value
The part fit perfectly , make sure that you use a 10 mm wrench to securely tighten the product but don t over tighten . Great job NPD usual !
Submitted on August 31, 2020 by David H.
Quality
Value
Solid piece. Mounting hardware improvement would allow easier installation. Overall once installed looks good
Submitted on September 23, 2020 by Randy G.
YES I would recommend this product.
Quality
Value
what a POS i cant even tread the nut on the stud ,it will not fit
Submitted on October 24, 2021 by wesley h.
YES I would recommend this product.
We are
sorry to see your frustration, but please be aware that we address this
potential problem in the description of the product:
“COVER, Grille Molding Lower Joint, original,
each, argent painted insert, Be
careful installing the sheet nut on to the stud, The self threading aspect puts
stress on the pin and over torquing can shear the pin, Pre-threading the nut
off the car can help alleviate the potential problem, This situation also
plagued original covers”
This is
unfortunately the only reproduction that we have available to us. Again, sorry
for your trouble on this.
Quality
Value
Nice piece. I was expecting something thin yet adequate like the actual moldings but this piece is substantial - actually a chromed piece of metal. I’m utilizing it on a 65 where I wanted to remove the Coral/horse etc.
Submitted on February 04, 2022 by Kerry S.
YES I would recommend this product.
Quality
Value
Submitted on December 27, 2022 by Keith B.
YES I would recommend this product.
Quality
Value
Fits well, I second the other reviewer(s) that say to thread the nut onto the piece first, outside of the car, and then put it on. The nut cuts its own threads, it's best to do that in a more controlled environment. Snug the nut, don't crank down on it. It stays on just fine, I had my car on the highway and on bumpy roads no problem The part fits well and looks good. Works with reproduction grille trim and fully covers the joint
Submitted on June 04, 2023 by Danylo M.
YES I would recommend this product.
Quality
Value
This moulding trim is very high quality, and after some time, fiddling with it's mounting speed nut, and adjusting it's position, I was most satisfied with part.
Submitted on February 01, 2024 by Joseph L.
YES I would recommend this product.
Quality
Value
In Stock!
