3/64” thick x 1 1/2” wide, 4‘ length. Used to set vent glass, door glass and quarter glass into their respective channels or frames. Ford & GM seem to have used two thicknesses of the glass setting seal strips. Unfortunately they do not specify what thickness was used where. Windows require about 40”, vent windows 28”. See also 214A10-1.
1947 (47), 1948 (48), 1949 (49), 1950 (50), 1951 (51), 1952 (52), 1953 (53), 1954 (54), 1955 (55), 1956 (56), 1957 (57), 1958 (58), 1959 (59), 1960 (60), 1961 (61), 1962 (62), 1963 (63), 1964 (64), 1965 (65), 1966 (66), 1967 (67), 1968 (68), 1969 (69), 1970 (70), 1971 (71), 1972 (72), 1973 (73), 1974 (74), 1975 (75), 1976 (76), 1977 (77), 1978 (78), 1979 (79), 1980 (80), 1981 (81), 1982 (82), 1983 (83), 1984 (84), 1985 (85), 1986 (86), 1988 (88), 1989 (89), 1990 (90), 1991 (91), 1992 (92), 1993 (93), 1994 (94), 1995 (95), 1996 (96), 1997 (97), 1998 (98)NPD Part Number : 214A10-2A Manufacturer Reference #'s: 21478
1965-1973 MUSTANG SEE THICKNESS NOTES IN DESCRIPTION
1979-1979 MUSTANG SEE THICKNESS NOTES IN DESCRIPTION
1967-1973 COUGAR SEE THICKNESS NOTES IN DESCRIPTION
1960-1970 FALCON (BEFORE 1/1/70), SEE THICKNESS NOTES IN DESCRIPTION
1955-1957 TBIRD SEE THICKNESS NOTES IN DESCRIPTION
1948-1979 F1-F350 SEE THICKNESS NOTES IN DESCRIPTION
1980-1996 F100-F350 SEE THICKNESS NOTES IN DESCRIPTION
1997-2004 F150-F350 SEE THICKNESS NOTES IN DESCRIPTION
1966-1996 BRONCO SEE THICKNESS NOTES IN DESCRIPTION
1967-1981 CAMARO SEE THICKNESS NOTES IN DESCRIPTION
1964-1987 CHEVELLE SEE THICKNESS NOTES IN DESCRIPTION
1967-1981 FIREBIRD SEE THICKNESS NOTES IN DESCRIPTION
1962-1979 NOVA SEE THICKNESS NOTES IN DESCRIPTION
1964-1972 TEMPEST GTO, TEMPEST, LEMANS, SEE THICKNESS NOTES IN DESCRIPTION
1947-1998 CHEVY TRUCK SEE THICKNESS NOTES IN DESCRIPTION
1964-1988 CUTLASS SEE THICKNESS NOTES IN DESCRIPTION
1964-1972 SKYLARK SEE THICKNESS NOTES IN DESCRIPTION
1960-1976 MOPAR SEE THICKNESS NOTES IN DESCRIPTION
1983-2004 R/B/E/M SEE THICKNESS NOTES IN DESCRIPTION
1970-1970 FALCON (FROM 1/1/70), SEE THICKNESS NOTES IN DESCRIPTION
1968-1971 TORINO SEE THICKNESS NOTES IN DESCRIPTION
1964-1970 FAIRLANE SEE THICKNESS NOTES IN DESCRIPTION
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
If you are rebuilding your 60's vent windows (or replacing the vent glass into the vent frame) this item is NOT EXACTLY what you want! It is not thick enough. When doubled up, it did work out just about right. I was able to tap the glass back into the frame and the doubled rubber secured it properly. Ideally, we need material that is just at or under 6/64" for a proper, tight fit.
Submitted on May 13, 2019 by Gary B.
YES I would recommend this product.
Quality
Value
Product is as stated. Worked great. Service was great. Very friendly staff.
Submitted on December 19, 2019 by Gilbert T.
YES I would recommend this product.
Quality
Value
Worked great for vent window seal.
Submitted on January 12, 2020 by Jon H.
Quality
Value
Hard to find part, this was exactly what I needed to mount the vent windows and door windows in their frame.
Submitted on May 19, 2020 by Dick E.
YES I would recommend this product.
Quality
Value
Worked as described.
Submitted on May 26, 2020 by Nicholas A.
YES I would recommend this product.
Quality
Value
Submitted on July 11, 2020 by mark f.
YES I would recommend this product.
Quality
Value
Ordered both sizes...not a tight fit to the glass !
Submitted on April 09, 2021 by Desmond O.
YES I would recommend this product.
Quality
Value
Very good seal for the vent window. Would order it again if I need it.
Submitted on May 26, 2021 by Charles M.
YES I would recommend this product.
Quality
Value
Works good
Submitted on July 19, 2021 by Tom H.
YES I would recommend this product.
Quality
Value
Exactly the right product to set vent window glass into its frame! Works well, one 4 foot strip did two vent windows on my 67 Mustang fastback.
Submitted on February 16, 2022 by Bob B.
YES I would recommend this product.
Quality
Value
I bought 2 sizes as I wasn't sure which would be needed. This size was a better fit then the 1/16" for my 55 F-100. I sorta wish one side had a sticky surface to help hold it on to the glass.
Submitted on February 07, 2023 by Richard B.
YES I would recommend this product.
Quality
Value
Worked out great
Submitted on May 04, 2023 by MICHAEL C.
YES I would recommend this product.
Quality
Value
The 1/16” held better
Submitted on July 09, 2023 by David R.
YES I would recommend this product.
Quality
Value
Wonderful product, working great
Submitted on August 02, 2023 by CHARLES L.
YES I would recommend this product.
Quality
Value
Not thick enough to hold glass. Threw it in the garbage and used urethane
Submitted on November 28, 2023 by Boyd f.
We are sorry that the 214A10-2A sealing strip was too thin for you, but we clearly list two different thicknesses (214A10-1 is 1/16” and 214A10-2A is 3/64”), and we explain in the description of 214A10-2A that you purchased “thinner version of 214A10-1, Ford seems to have used both thicknesses”.
And that there is the conundrum. Ford used both thicknesses, and no one in the Mustang industry or restoration experts have been able to solidly determine which years/plants/dates apply to which thickness.
The only
reasonable way to go about it, considering that trying to measure your frame
and glass to determine the difference of only 1/64” would be difficult, is to
just buy BOTH sizes, and use the one that works. Unfortunately, there’s just no
other way that we can sell this stuff.
Quality
Value
In Stock!
