FUEL LINE, Tank to Pump, carbon steel, 3/8 inch diameter, 2 piece line, See 9369-2K for apron grommet and 380374-S, 358381-S2 for fuel line clip options, By Classic Tube, All required flared fitting ends are SAE grade double flared, Lines are CNC bent in either carbon steel or in stainless steel for improved durability or show, Tubing is US-made SAE J526 spec. Carbon tubing has a galvanized type top coating that simulates the original Terne coating, ASTM B117 salt spray test is 3000 hours where originals only passed 250 hours, Concours approved, Stainless steel lines have an S at the end of the part number suffix for easy identification, In regards to the coating applied to carbon steel lines:The original Tinned Bundy Weld "TBW" tubing was originally manufactured by supplier Bundy Corporation, had a corrosion resistant coating called Terne coating, Unfortunately that top coating is no longer available because of a ruling outlawing the lead and tin dip process by the EPA almost 20 years ago, At the end of that time Bundy Corp. was moving that coating process to two of their other plants until finally the enforcement pushed them to comply, At that time Bundy Corp. had already switched to offering a few different aluminum rich coatings that was then the new OEM standard, In the end Classic Tube was successful in sourcing tubing made in the USA that is SAE J 526 specification and has a "galvanized" type top coating that simulates the original Terne coating, You may also be interested in knowing the results of the ASTM B117 salt spray test was only 250 hours for the old Terne coating, This tubing has passed at 3000 hours, Classic Tube does not useAluminized tubing, Zinc plated or the Off-Shore tubingthat the other manufacturers use and have the finishes that people dislike,
NPD Part Number : 9369-32A Manufacturer Reference #'s: Classic Tube MUF1010-OE,
1969-1970 MUSTANG W/ FACTORY REAR SWAY BAR
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Submitted on May 21, 2019 by Mike E.
YES I would recommend this product.
Quality
Value
Great fit
Submitted on April 20, 2023 by John M.
YES I would recommend this product.
Quality
Value
Any other time I ordered classic tube it came in a classic tube box. This Was loose in a NPD box. The bend that goes from the rocker under the protector then to the rear was totally screwed up. I did get it to work but ended up cutting and splicing due to the fact the tubing was almost smashed shut.
Submitted on May 01, 2023 by John M.
YES I would recommend this product.
Quality
Value
Correct part, fits great
Submitted on July 16, 2024 by Carl M.
YES I would recommend this product.
Quality
Value
In Stock!
