FUEL LINE, Tank to Pump, stainless steel, 3/8 inch diameter “race” style line for higher fuel flow, Requires minor modifications to handle the larger diameter line, See 9369-2K for apron grommet and 380374-S, 377119-S32 for fuel line clip options, By Classic Tube, All required flared fitting ends are SAE grade double flared, Lines are CNC bent in stainless steel for improved durability and show, Tubing is US-made SAE J526 spec, Concours approved,
NPD Part Number : 9369-21RS Manufacturer Reference #'s: Classic Tube MUF1003-SC,
1965-1966 MUSTANG 289
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
good fit, nice piece
Submitted on September 06, 2019 by mark r.
YES I would recommend this product.
Quality
Value
Good fit and quality. If your 65-66 Mustang is running at the time of installation, you will need to clear the path of the line by dropping exhaust, removing driver RR shock, front & rear tire, drive shaft, parking brake cable from adjustment nut, rear end vent hose, and raise the front and rear on jack stands. Let the rear end hang down by placing stands on rear torque boxes allowing for more room to feed the line through driver rear wheel well. After removing these components, the installation will go smooth.
Submitted on June 26, 2020 by Francisco D.
YES I would recommend this product.
Quality
Value
Great fit!!!! There is some, very minor, modifications needed going to 3/8. Overall one of the easiest installs in my restoration
Submitted on July 15, 2020 by David B.
YES I would recommend this product.
Quality
Value
Fits perfect
Submitted on May 16, 2021 by Charles c.
YES I would recommend this product.
Quality
Value
In Stock!
