FUEL LINE, Tank to Pump, carbon steel, 5/16 inch diameter, See 9369-1K for apron grommet and 380374-S, 377119-S32 for fuel line clip options, By Classic Tube, All required flared fitting ends are SAE grade double flared, Lines are CNC bent in either carbon steel or in stainless steel for improved durability or show, Tubing is US-made SAE J526 spec. Carbon tubing has a galvanized type top coating that simulates the original Terne coating, ASTM B117 salt spray test is 3000 hours where originals only passed 250 hours, Concours approved, Stainless steel lines have an S at the end of the part number suffix for easy identification, In regards to the coating applied to carbon steel lines:The original Tinned Bundy Weld "TBW" tubing was originally manufactured by supplier Bundy Corporation, had a corrosion resistant coating called Terne coating, Unfortunately that top coating is no longer available because of a ruling outlawing the lead and tin dip process by the EPA almost 20 years ago, At the end of that time Bundy Corp. was moving that coating process to two of their other plants until finally the enforcement pushed them to comply, At that time Bundy Corp. had already switched to offering a few different aluminum rich coatings that was then the new OEM standard, In the end Classic Tube was successful in sourcing tubing made in the USA that is SAE J 526 specification and has a "galvanized" type top coating that simulates the original Terne coating, You may also be interested in knowing the results of the ASTM B117 salt spray test was only 250 hours for the old Terne coating, This tubing has passed at 3000 hours, Classic Tube does not useAluminized tubing, Zinc plated or the Off-Shore tubingthat the other manufacturers use and have the finishes that people dislike,
NPD Part Number : 9369-21A Manufacturer Reference #'s: Classic Tube MUF1002-OE,
1965-1966 MUSTANG (FROM 8/1/64), 289
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The bends were almost on the mark to the original.
Submitted on May 22, 2020 by Tim B.
YES I would recommend this product.
Quality
Value
Fit my 1965 Mustang with very little manipulating.
Submitted on August 29, 2020 by Dave G.
YES I would recommend this product.
Quality
Value
fits like its suppose to! NPD shipped it out fast.
Submitted on April 29, 2021 by Ron H.
YES I would recommend this product.
Quality
Value
The line fit very good I thought it was a little long in a few spots but over all worked very well.
Submitted on May 18, 2021 by Stephen J.
YES I would recommend this product.
Quality
Value
Submitted on February 05, 2023 by Peter G.
YES I would recommend this product.
Quality
Value
In Stock!
