FUEL LINE, Pump to Carburetor, carbon steel, By Classic Tube, All required flared fitting ends are SAE grade double flared, Lines are CNC bent in either carbon steel or in stainless steel for improved durability or show, Tubing is US-made SAE J526 spec. Carbon tubing has a galvanized type top coating that simulates the original Terne coating, ASTM B117 salt spray test is 3000 hours where originals only passed 250 hours, Concours approved, Stainless steel lines have an S at the end of the part number suffix for easy identification, In regards to the coating applied to carbon steel lines:The original Tinned Bundy Weld "TBW" tubing was originally manufactured by supplier Bundy Corporation, had a corrosion resistant coating called Terne coating, Unfortunately that top coating is no longer available because of a ruling outlawing the lead and tin dip process by the EPA almost 20 years ago, At the end of that time Bundy Corp. was moving that coating process to two of their other plants until finally the enforcement pushed them to comply, At that time Bundy Corp. had already switched to offering a few different aluminum rich coatings that was then the new OEM standard, In the end Classic Tube was successful in sourcing tubing made in the USA that is SAE J 526 specification and has a "galvanized" type top coating that simulates the original Terne coating, You may also be interested in knowing the results of the ASTM B117 salt spray test was only 250 hours for the old Terne coating, This tubing has passed at 3000 hours, Classic Tube does not useAluminized tubing, Zinc plated or the Off-Shore tubingthat the other manufacturers use and have the finishes that people dislike,
NPD Part Number : 9369-2 Manufacturer Reference #'s: Classic Tube MUC1007-OE,
1966-1968 MUSTANG 289-2V, 289-4V, FORD 2100 OR 4100 CARB
1967-1967 COUGAR 289
1966-1968 FALCON 289
1968-1968 TORINO 289
1966-1968 FAIRLANE 289
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Submitted on August 17, 2018 by Ronald K.
Quality
Value
Submitted on July 02, 2019 by Kevin F.
YES I would recommend this product.
Quality
Value
It worked for me.
Submitted on October 01, 2019 by Gary T.
Quality
Value
This gas line looks exactly like when the car came off the assembly line. Easy to install and worked perfectly with no leaks.
Submitted on March 15, 2020 by John J.
YES I would recommend this product.
Quality
Value
Submitted on April 26, 2020 by Michael S.
YES I would recommend this product.
Quality
Value
Submitted on June 24, 2020 by Ronald Z.
YES I would recommend this product.
Quality
Value
Submitted on July 04, 2020 by Michael S.
YES I would recommend this product.
Quality
Value
Excellent fuel line. Polished stainless steel, durable, bends in the correct places, and hardened fittings on both ends. It was relatively easy to install this fuel line. I had to move my new Flamethrower coil out of the way, but I could have bent the fuel line out and away from the coil instead. I'm super pleased with this fuel line for my 1965 Mustang fastback. Not only that, but NPD shipped the fuel line right away and I received it in just a few days. That's outstanding customer service!
Submitted on August 28, 2020 by Robert B.
YES I would recommend this product.
Quality
Value
Fit pretty much perfect and looks much better than the bent up, discolored original.
Submitted on April 21, 2022 by Bob H.
YES I would recommend this product.
Quality
Value
You may need to do some slight bending since every set up is slightly different, even if stock - so make sure you have a bending tool available, especially if you have a power steering pump. Also beware of the heat exchange properties for metal fuel lines and keep the routing clear of the engine surfaces and water pump so you don't vapor lock your fuel line on the way to the carb. There are reproduction fuel line bracket/retainers available to secure the line if it has excessive movement to keep it elevated above the water pump and secure - they can be located on line.
Submitted on July 12, 2022 by Richard V.
YES I would recommend this product.
Quality
Value
Good finish, quality appears to be very good, price was competitive. Installation was uneventful.
Submitted on August 14, 2022 by William F.
YES I would recommend this product.
Quality
Value
Submitted on February 05, 2023 by Peter G.
YES I would recommend this product.
Quality
Value
The fuel line fit perfectly.
Submitted on December 23, 2023 by NED G.
YES I would recommend this product.
Quality
Value
In Stock!
