MOUNTING KIT, FRONT STRUT TO SPINDLE, REPLACEMENT STYLE, INCL (2) CLASS 10.9 STRUT MOUNT BOLTS W/ 24MM HEAD WIDTH, (2) CLASS 10.9 STRUT MOUNT NUTS W/ 24MM HEAD WIDTH, (1) CLASS 04 SENSOR BRACKET THIN NUT, SAME GRADE CLASS AS ORIGINAL, DESIGNED TO MOUNT ONE SIDE, 2 REQD PER CAR
This replacement style mounting kit from National Parts Depot is designed to get your Mustang Suspension back in proper working order. This front strut to spindle mounting kit includes 2 class 10.9 strut to spindle bolts and 2 class 10.9 mounting nuts. The mounting bolts in this kit feature a black Phosphate finish and have a 24mm hex flange head design. These bolts also feature the correct partial thread design that the factory used to ensure a proper fit. The mounting nuts feature a phosphate & oil finish similar to factory as well as the correct TOP LOCK design that the original nuts featured. These nuts are also the correct 24mm wrench size that is an exact match to the original nuts. Last is the correct thin hex head nut that was used to mount the factory Anti Lock sensor bracket to the strut mount bolt end. So if you are looking for the best replacement style hardware for SN95 Mustang then this is the kit for you!
Note:
When replacing your factory front struts it is recommended to replace the mounting hardware at the same time. This kit ensures a proper fit.
Installation Note:
This kit is designed to mount one side of your Mustang strut to spindle. Two kits are required for a complete car.
Product Note:
All original factory hardware was a 10.9 classification and is why NPDs kit features the same classification.
Restoration Note:
Sometime during the SN95 history Ford changed the finish on some of the hardware from a gray / black finish to a silver finish. This hardware kit is designed after the earlier style hardware. This kit is called out as a replacement style due to the head size on the bolts not being the correct 21mm like the original hardware. The factory used a 21mm on the bolt side and a 24mm on the nut side. This kit has a 24mm on both. See M-18124-100BK for OE correct style.
Ford Mustang Years:
1994 (94), 1995 (95), 1996 (96), 1997 (97), 1998 (98), 1999 (99), 2000 (00), 2001 (01), 2002 (02), 2003 (03), 2004 (04)
NPD Part Number : M-18124-100CK Manufacturer Reference #'s: M-18124-100CK
1994-2004 MUSTANG ALL, 1 KIT REQD PER SIDE
0-0 THIS KIT FEATURES THE REPLACEMENT STYLE 24MM HEX HEAD HEAD WIDTH
0-0 THAT IS NOT LIKE THE ORIGINAL HARDWARE
0-0 THIS KIT IS DESIGNED TO BE A REPLACEMENT STYLE
0-0 SEE M-18124-100BK FOR OE STYLE KIT
WARNING: This product can expose you to chemicals including lead and DEHP, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Quality product works as intended
Submitted on September 01, 2021 by John H.
YES I would recommend this product.
Quality
Value
In Stock!
